Business Liquidation #11370

Bidding Now! - ends Mon, Jul 31 at 06:25:00 pm
Page 1 of 1    
Grid with imagesList view
Page 1 of 1    
Grid with imagesList view
You can enter a new proxy bid at any time by entering a bid greater than your current high bid.
A proxy bid would make it more difficult for others to outbid you.

A proxy bid is the highest amount you are willing to pay for an auction item.

In response to other bids, the auction system will automatically increase your bid in the smallest increment possible (up to your proxy bid amount) in order to maintain your lead position.

To get a proxy bid you simply enter the maximum amount you are willing to pay into the bid form just as you would any other bid. If your bid is more than one bidding increment above the current high bid you will get a proxy bid unless another bidder has a proxy bid in place that is higher than the amount you enter.

At the end of the auction, the winning bidder pays only the lowest winning bid possible. That means that you can win an auction item at a price less than your proxy bid amount.

Your proxy bid amount is kept confidential from other bidders.

You can lower or delete a proxy bid by entering a lower amount.

Note: After watching hundreds of auctions and talking to thousands of bidders, we think using proxy bids in your bidding strategy works best for most people. It eliminates some of the pressure and reduces the risk of "sniping", where other bidders slip in slightly higher bids in the last seconds of bidding.

You now have a proxy bid.

You can raise or lower your proxy bid at any time by entering a new amount.

If you wish to remove your proxy bid you can do so by entering an amount equal to the current bid into the bid form.

You have a proxy bid of %s on this item. That means that the system will place bids for you in response to bids from other bidders, up to %s.

You can adjust this proxy bid by using the form above.

If you want to remove your proxy bid click here.
You can add a proxy bid to protect your item against other bidders by using the form above.
Place a bid using the form above.

You can enter the minimum bid of %s or a greater amount.

If you bid more than the minimum bid you will get a proxy bid that the system will use to bid for you against other bidders, up to the amount you enter. So if you enter a bid of more than %s for this item, the system will place bids on your behalf in response to bids from other users until someone bids more than your high bid.
LowHighIncrement
$0.00$8.99$0.10
$9.00$39.99$1.00
$40.00$99.99$2.50
$100.00$199.99$5.00
$200.00$999.99$10.00
$1,000.00$2,499.99$25.00
$2,500.00$4,999.99$50.00
$5,000.00$1,000,000,000.00$100.00
LowHighIncrement
$0.00$100,000,000.00$1.00
Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Hengda 30 Bar Air Industrial Compressor with Air Tank & Filters 

Pressure: 30 Bar (400 PSI)

Voltage: 600 Volts, 3 Phase, 60 hz

Model: Y132M-4

Parts: Fully Canadian Electrical Safety Authority Approved

Built in: 2013

Hours on Compressor: 8,000

Packaging: On 2 standard 40" x 48" x 48" inch wooden pallets

Weight: 800 lbs

The compressor is in great shape, features safety cage and shock absorbers for reduced shaking. Includes AirTank and 2-Air Filters, as well as Wall-Terminal to launch unit. Oil changed regularly on

Oil changed regularly on the compressor, and belts all maintained. A strong compressor which can be used for multiple production lines in a facility. 

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Videos Click to view Item Photo Gallery

Item Description:

Semi-Automatic Blow Molding Line

Manufactured in Zhejiang, China, by Changshenda Machinery in 2013, a long-established blow molding machinery manufacturer. When all the Machines arrived in Canada, all electrical & safety components were upgraded to E.S.A. (Canada Electrical Safety Authority) Parts. All machinery is in mint condition and only has around only 8,000 total production hours on it. This line is a blow molding machine for any blow molder looking to service many Small-Custom Production Orders, Prototype Bottle Design Manufacturing, Testing on New Plastic Resins, or a Beverage Company looking to get started in blowing their own bottles. This package will include the Stretch Blow Molding & Pre-Heater line to make bottles as well as three custom-blow molds, with many spare parts for the machine. Ancillary equipment will not be included with the machine.

The bottle capacity ranges from 50ml Bottles to 1000ml Bottles in 18mm to 38mm neck openings and much bottle design capability. We used to line for order sizes 5,000-50,000 per run and test-produced multiple new Bioplastics as well as PET resin. A Full Mold Changeover will take only 40 minutes maximum. This 2-Cavity system allows extremely low tooling/mold costs, which makes this a perfect line for any custom blow molder. Machinery manuals included. The line will include: (3) Blow Molds with all neck-inserts, blow shells & backing plates. This line was carefully maintained by all the plant staff. It really is a workhorse and if you properly maintain it, it will run great for many years.

Technical Specifications:

Clamping Force: 80 kn
Working Pressure: 1.2 Mpa
Air Pressure for Producing Bottles: 4.0 Mpa
Production Rate: 500 bottles/ per hour (Based on 500ml bottle)
Bottle Size Range: 50ml-1500ml
Neck Sizes: 18mm-38mm
Molds: 2-Cavity
Mold plate: 360 x 500 mm
Mold stroke: 140 mm
Mold thickness: 200 mm
Min mold thickness: 120 mm
Stretching Stroke: 380 mm
Model: CSD-2
Year: 2013
Serial #: M-3192AA

The Blow Molder Specifications:
Voltage: 220 Ac, Single-Phase, 6 Amps and 60 hz
Year Built: 2013
Hours: 8,000
Packaging: Free-Standing
Weight: 690 Kgs
Dimensions: 1520mm x 580mm x 1750 mm
Pre-Heater Unit Specifications:
Voltage: 600 Ac, 3-Phase,
Year Built: 2013
Hours: 8,000
Packaging: On Wheels (Free-standing)
Weight of Pre-Heater: 280 Kgs
Dimensions of Pre-Heater: 1350mm x 700mm x 1350 mm

Video of Similar Machine in the youtube link 

More detail, please contact with Alice. Email: sale@sunstarmachine.com

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Videos Click to view Item Photo Gallery

Item Description:

Prototype Spray-Coating of Filling Machine 

This machine can be used to test various liquid spray coating for bottles or other products with a few modifications to the holders. The way it works is you load a bottle into the disc holder then press the trigger buttons or (operate from the back PLC) and it evenly sprays the bottle and blows air into it. The discs spin so the bottle or object is evenly coated. The liquid is pumped through a tube going into the drum of whatever liquid is being used.

The machine can also easily be changed into a filling machine with a change of the nozzle which could make it great for a small beverage filling company. We used it to add a coating to PLA (Polylactic Acid) bottles that we created with a University investigating Bioplastics in Canada. The PLC is very easy to operate and the production rate really depends on the operator but we have done about 200-300 bottles

Machine Manufacturer: Changshengda Machinery in Zhejiang, China
The Model #: M-3191
Serial Number: 758496
Electrical: 220 Volts and 60 Hz
Parts: Fully Canadian Electrical Safety Approved
Hours: 80 hours
Packaging: Free-standing
Weight: 250 pounds

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.


Please wait...