Business Liquidation #8897

Bidding Now! - ends Tue, Oct 4 at 06:30:00 pm
Page 1 of 1    
Grid with imagesList view
Page 1 of 1    
Grid with imagesList view
You can enter a new proxy bid at any time by entering a bid greater than your current high bid.
A proxy bid would make it more difficult for others to outbid you.

A proxy bid is the highest amount you are willing to pay for an auction item.

In response to other bids, the auction system will automatically increase your bid in the smallest increment possible (up to your proxy bid amount) in order to maintain your lead position.

To get a proxy bid you simply enter the maximum amount you are willing to pay into the bid form just as you would any other bid. If your bid is more than one bidding increment above the current high bid you will get a proxy bid unless another bidder has a proxy bid in place that is higher than the amount you enter.

At the end of the auction, the winning bidder pays only the lowest winning bid possible. That means that you can win an auction item at a price less than your proxy bid amount.

Your proxy bid amount is kept confidential from other bidders.

You can lower or delete a proxy bid by entering a lower amount.

Note: After watching hundreds of auctions and talking to thousands of bidders, we think using proxy bids in your bidding strategy works best for most people. It eliminates some of the pressure and reduces the risk of "sniping", where other bidders slip in slightly higher bids in the last seconds of bidding.

You now have a proxy bid.

You can raise or lower your proxy bid at any time by entering a new amount.

If you wish to remove your proxy bid you can do so by entering an amount equal to the current bid into the bid form.

You have a proxy bid of %s on this item. That means that the system will place bids for you in response to bids from other bidders, up to %s.

You can adjust this proxy bid by using the form above.

If you want to remove your proxy bid click here.
You can add a proxy bid to protect your item against other bidders by using the form above.
Place a bid using the form above.

You can enter the minimum bid of %s or a greater amount.

If you bid more than the minimum bid you will get a proxy bid that the system will use to bid for you against other bidders, up to the amount you enter. So if you enter a bid of more than %s for this item, the system will place bids on your behalf in response to bids from other users until someone bids more than your high bid.
LowHighIncrement
$0.00$8.99$0.10
$9.00$39.99$1.00
$40.00$99.99$2.50
$100.00$199.99$5.00
$200.00$999.99$10.00
$1,000.00$2,499.99$25.00
$2,500.00$4,999.99$50.00
$5,000.00$1,000,000,000.00$100.00
LowHighIncrement
$0.00$100,000,000.00$1.00
Extended Bidding: i
Click to view Item Photo Gallery

Item Description:

Table Saw Uni Saw 

S/N-100025s

3 phase 3 hp motor

Lung Sheng Machinery now Chen Sheng Machinery makes hi end woodworking tools in Taiwan since 1974.

The tilt adjustment knob is bent the surface needs to be polished.

There is no material guide fence but it has angle iron rails that were made to accomodate an extension table.  

This saw was working when taken out of use.

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer's request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller's premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Extensive Lot of Cast Iron Pipe Fittings

This is a very large lot of cast iron pipe fittings.

From small 1/2 inch fittings to 4" fittings.

Each picture shows a box or bucket of different fittings no fitting has been photo graphed twice.

 

Items are new and used and in working condition. 

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer's request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller's premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

(3) Ortman Miller Air Cylinders 

Product label says F Air 6x6 and one serial number is 306788 and the outside of the cylinder is a 6.5" diameter.

Base to the top of the cylinder housing is 14.75"

Unknown working condition, working last time tested but have been sitting for several years. Seals still show oil. 

 

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer's request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller's premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Photo Gallery

Item Description:

AAF Roto Clone Dust Vacuum System Type W 8"

Comes with water nozzels 

Item is used and in working condition. 

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer's request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller's premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Photo Gallery

Item Description:

(2) A Frame Panel Heavy Duty Carts

Two A frame tubular steel rolling carts. The larger one measures 71" long 30" wide at the base and 52" high.

The shorter one is 54" long, 30" wide at the base and 54" high. 

Unknown if the are new or used but they are in working condition. 

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer's request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller's premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Photo Gallery

Item Description:

(2) Heavy Duty Factory Carts

(1) flat bed with metal handles, 36x72

(1) square that has angle iron rails on each corner, heavy steel casters roughly 32x32

Items are used and in working condition. 

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer's request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller's premises after this removal deadline will revert back to possession of the seller, with no refund.


Please wait...