Lewiston Porter CSD Surplus #9033

All items closed
Page 1 of 1    
Grid with imagesList view
Page 1 of 1    
Grid with imagesList view
You can enter a new proxy bid at any time by entering a bid greater than your current high bid.
A proxy bid would make it more difficult for others to outbid you.

A proxy bid is the highest amount you are willing to pay for an auction item.

In response to other bids, the auction system will automatically increase your bid in the smallest increment possible (up to your proxy bid amount) in order to maintain your lead position.

To get a proxy bid you simply enter the maximum amount you are willing to pay into the bid form just as you would any other bid. If your bid is more than one bidding increment above the current high bid you will get a proxy bid unless another bidder has a proxy bid in place that is higher than the amount you enter.

At the end of the auction, the winning bidder pays only the lowest winning bid possible. That means that you can win an auction item at a price less than your proxy bid amount.

Your proxy bid amount is kept confidential from other bidders.

You can lower or delete a proxy bid by entering a lower amount.

Note: After watching hundreds of auctions and talking to thousands of bidders, we think using proxy bids in your bidding strategy works best for most people. It eliminates some of the pressure and reduces the risk of "sniping", where other bidders slip in slightly higher bids in the last seconds of bidding.

You now have a proxy bid.

You can raise or lower your proxy bid at any time by entering a new amount.

If you wish to remove your proxy bid you can do so by entering an amount equal to the current bid into the bid form.

You have a proxy bid of %s on this item. That means that the system will place bids for you in response to bids from other bidders, up to %s.

You can adjust this proxy bid by using the form above.

If you want to remove your proxy bid click here.
You can add a proxy bid to protect your item against other bidders by using the form above.
Place a bid using the form above.

You can enter the minimum bid of %s or a greater amount.

If you bid more than the minimum bid you will get a proxy bid that the system will use to bid for you against other bidders, up to the amount you enter. So if you enter a bid of more than %s for this item, the system will place bids on your behalf in response to bids from other users until someone bids more than your high bid.
LowHighIncrement
$0.00$8.99$0.10
$9.00$39.99$1.00
$40.00$99.99$2.50
$100.00$199.99$5.00
$200.00$999.99$10.00
$1,000.00$2,499.99$25.00
$2,500.00$4,999.99$50.00
$5,000.00$1,000,000,000.00$100.00
LowHighIncrement
$0.00$100,000,000.00$1.00
Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Up for bid are these (2) Heavy Duty Waukesha Enginator #VSG11G Natural Gas 113 KVA Generators With Control Bank

These (2) generators are located within a brick out building which provided stand-by power to the schools critical electrical systems

They are both in good working order and this lot includes most of the equipment in this generator room

The images show some athletic & sporting items and the building's heater which are not included, the CSD staff will identify any other items that need to stay in this out building.

The (2) stand-by natural gas generators share a common control system and were installed new in 1998

MagnaMax Syschronous AC Generators:
Model 431RSL4669
3 PH, 60 HZ, 1800 RPM

Continuous: KW 145, Volts 277/480
KVA 181, AMPS 218

Enginators:
Model VSG11G2
1800 RPM, 3 PH, 480/277V, 60 HZ
Continuous - KW 90, KVA 113, AMPS 135

Good Luck Bidding

The Following Information Are Some General Statements Similar VSG11G Units: 

SPECIFICATIONS:

Waukesha Engine - F11G Gas Engine
Cylinders - lnline 6
Piston Displacement - 673 cu. in.(11 L)
Bore & Stroke - 5.0 x 5.71 (127 x 145 mm)
Compression Ratio - 10:1
Jacket Water Capacity - 7.1 gal. (27 L)
Starting System - 24V DC Electric
Fuel LHV - 900 Btu/ft3 (33.5 J/cm3)
Lube Oil Capacity 6.1 gal. (23 L)

BASIC ENGINATOR SPECIFICATIONS:

AIR CLEANER - Two stage, dry element type with rain shield and service indicator.

BASE - Engine, generator and optional cooling components are mounted on heavy, structural steel
base suitable for lifting.

BREATHER - Crankcase, closed.

CAMSHAFT - Forged alloy steel, quiet helical gear drive.

CONNECTING RODS - Forged alloy steel. Angle split.

COOLING SYSTEM - Choice of mounted radiator with pusher fan, core guard and duct adaptor, heat
exchanger with shipped loose expansion tank or connections for remote radiator cooling.

CRANKCASE - Integral alloy cast iron crankcase and cylinder frame with nodular iron main bearing
caps.

CRANKSHAFT - Forged alloy steel with precision ground and induction hardened main and crankpin
journals, statically and dynamically balanced. Viscous vibration damper.

CYLINDERS - Replaceable wet cylinder liners of centrifugally cast alloy iron.

EXHAUST SYSTEM - Water cooled exhaust manifold. Single vertical exhaust connection with ANSI 125#
outlet flange.

FUEL SYSTEM - Natural gas carburetor, gas pressure regulator, 24V DC gas solenoid valve (shipped
loose). Pressure required: 5 - 15 psig.

GENERATOR - Open, drip-proof, direct connected, synchronous, fan cooled, AC revolving field type,
2/3 pitch, single bearing generator with PMG brushless exciter for 300% short circuit sustain (250%
for 50 Hz) and motor starting. TIF and Deviation Factor within NEMA MG-
1.32. Voltage: 480/277, 3 phase, 12 wire Wye, 60 Hz, and 380/220 12 wire Wye, 50 Hz. Temperature
rise within NEMA 105° C for continuous duty, within NEMA 130° C for standby duty. Voltage
regulation is ± 0.5%. All generators are rated at 0.8 power factor, are mounted on the engine
flywheel housing, and have multiple steel disc flexible coupling drive. All continuous power
gensets have 10% overload capability.

GOVERNOR - Woodward 1724 Electrically powered governor (EPG) control system. Includes mounted
actuator and magnetic pickup, and control box. 24V DC operation.

IGNITION SYSTEM - Altronic V, solid state low tension magneto, with ground switch, coils, cables
and spark plugs. Non shielded.

INSTRUMENT PANEL - Engine mounted, includes water temperature, oil pressure gauges.

JUNCTION BOXES - Separate AC & DC junction boxes for engine wiring and external connections.

LUBRICATION SYSTEM - Gear type pump, full pressure system. Adjustable relief valve and full flow
depth type heavy duty centrifugal oil filter. Engine mounted plate type oil cooler. Industrial type
oil pan of cast aluminum alloy.

PAINT - Oilfield orange.

PISTONS - Aluminum alloy, with cast iron top ring insert. Oil cooled. Top ring is chrome plated
keystone type. 10:1 Compression ratio.

ENGINE PROTECTION SHUTDOWN CONTACTS - High water temperature, low oil pressure, and overspeed.

STARTING SYSTEM - 24V DC starting motor. Crank termination switch (shipped loose).

VOLTAGE REGULATOR - Automatic type.

WATER CIRCULATING SYSTEM
180° - 190° F (82° - 88° C) thermostatic temperature regulation. Belt-driven
pump for jacket water and oil cooler.

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer's request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller's premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Up for bid is this Onan 35EK-L 35KW Standby Natural Gas GenSet/Generator

It is in good working condition, it is missing its housing cover

Model: 35EK-L
1 & 3 PH, 35KW, 120/240 Volt
FORD
6-Cyl Motor
Natural Gas Type
511 Hrs. on meter

With OTCU 125C Transfer Switch, 120/208V, 3 PH, 4 Wire, 125 AMPS

Good luck bidding!

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer's request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller's premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Up for bid is this Onan 15.0 KW Natural Gas GenSet

It was in good working condition when removed from service


1 PH 10KW, KVA 12.5
3 PH 15 KW, KVA 18.8
120/240 Volt


With Transfer Switch
Natural Gas Type, 4 Cylinder
726 Hrs on meter

It is missing its housing cover

Good luck bidding!

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer's request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller's premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Videos Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Up for bid is this 1989 Toro GroundsMaster 580D 16" Tractor Mower

This Toro starts, run and cuts and is in fair mechanical condition (runs rough) 4,526 Hrs. on meter

It has an approximately 16' Cutting path, Denso 4 cylinder diesel engine that could use a tune up

The main reason for being removed from service is due to the "steering slips/needs service"

The tires are poor with three being soft, the guide wheels are missing, and seat is torn as shown in the images

You can watch a video of this mower by going to the "video tab"

This mower is being sold As Is for repair

Good luck bidding!

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer's request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller's premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Up for bid are these (6pc) Basketball Hoops including:

(2) Heavy Duty 6'x4' glass & aluminum framed units W/hardware

(4) 54" x 35" painted steel frame units

All are being sold "as is" in fair condition - view images

Good luck bidding!

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer's request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller's premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Up for bid is group of Large Cut Firewood/Logs 

I am not sure but it may be Maple

It has been sitting where it is for several years

Keep in mind these are mostly large and heavy cuts and the pile is pretty large.

Please view the images

There will be no assist with the logs, the buyer must bring there own equipment and manpower to remove.

Good luck bidding!

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer's request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller's premises after this removal deadline will revert back to possession of the seller, with no refund.


Please wait...