Twitter Google Email Pinterest Facebook

Business Liquidation ENrG INC.- NY #21583

Bidding Now! - ends Mon, Jul 6 at 06:00:00 pm
Page 1 of 10    REFRESH PAGE
Previous Page|Next Page
Grid with imagesList view
Page 1 of 10    REFRESH PAGE
Previous Page|Next Page
Grid with imagesList view
You can enter a new max bid at any time by entering a bid greater than your current high bid.
A max bid would make it more difficult for others to outbid you.

A max bid is the highest amount you are willing to pay for an auction item.

In response to other bids, the auction system will automatically increase your bid in the smallest increment possible (up to your max bid amount) in order to maintain your lead position.

To get a max bid you simply enter the maximum amount you are willing to pay into the bid form just as you would any other bid. If your bid is more than one bidding increment above the current high bid you will get a max bid unless another bidder has a max bid in place that is higher than the amount you enter.

At the end of the auction, the winning bidder pays only the lowest winning bid possible. That means that you can win an auction item at a price less than your max bid amount.

Your max bid amount is kept confidential from other bidders.

You can lower or delete a max bid by entering a lower amount.

You now have a max bid.

You can raise or lower your max bid at any time by entering a new amount.

If you wish to remove your max bid you can do so by entering an amount equal to the current bid into the bid form.

You have a max bid of %s on this item. That means that the system will place bids for you in response to bids from other bidders, up to %s.

You can adjust this max bid by using the form above.

If you want to remove your max bid click here.
You can add a max bid to protect your item against other bidders by using the form above.
Place a bid using the form above.

You can enter the minimum bid of %s or a greater amount.

If you bid more than the minimum bid you will get a max bid that the system will use to bid for you against other bidders, up to the amount you enter. So if you enter a bid of %s for this item, the system will place bids on your behalf in response to bids from other users until someone bids more than %s.
LowHighIncrement
$0.00$8.99$0.10
$9.00$39.99$1.00
$40.00$99.99$2.50
$100.00$199.99$5.00
$200.00$999.99$10.00
$1,000.00$2,499.99$25.00
$2,500.00$4,999.99$50.00
$5,000.00$1,000,000,000.00$100.00
LowHighIncrement
$0.00$100,000,000.00$1.00
Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Special Terms Apply Please Read Payment & Removal Terms on Left of Screen Before Bidding:

Public Inspection: Friday June 26th 10:00 am - 4:00 pm

Removal: Facility open for item pickup on the following dates only July 13th-17th from 9:00am - 4pm daily If buyer fails to remove their items on those dates, they are at risk of forfeiting their purchases without refund.
 
Buyer's must come prepared to remove their purchases, there are no tools or laborers to assist with removal. Only some carts & pallet Jack are available

Local Riggers: Dan Brooks (716) 652-8121 or Rick Rusiniak (716) 444-6345

Payment: All invoices must be paid in full by July 13th failure to do so may result in restocking fees & forfeit of purchases

The facility has one ground level & dock level bay but the overhead door (12') will not accommodate the height of a semi-box truck, all equipment is located on 1st floor which has concrete floors for your forklift.

General Condition: The equipment in this auction is in very good operational condition, with much of it kept in cleanrooms, if any defects are know they will be in the lot description. None of the equipment was tested by the auctioneer.

All items are sold "AS IS" and you are encouraged to inspect on June 26th.

24' Premier Casting / Deposition System for Thin Films onto moving Web

Description:

Custom built system in Clean Room (invested $217,018.00)

Casting / Deposition System for Thin Films onto moving WebCustom-built Caster, 24' length x 26" bed under glass for controlling film drying conditions and cleanliness.

  Grounded chassis with Keyence Ionizing bars / fans distributed across the system. Ports in side walls of caster for air flow process monitoring.   Multiple heaters and attached control box for heated bed zone. Integrated caster controls, Keyence laser for coating thickness monitoring, hot wire anemometers for in-line temperature and air velocity measuring, and Omega interface controller provide continuous feedback for process adjustments during casting / deposition campaigns.  Electric motor drive + step-down regulators.

Film payout and take-up with Coast Controls Web Handling System, 18" web width capable.  A Nilfisk HEPA-filtered vacuum cleans the web before entering the coating deposition zone.  Graco tank and Pumping equipment provides regulated delivery of coating material to the Premier Dies Slot Die / Extrusion head (Storage Box unit included).  The slot die can deposit up to 14" wide coatings onto webs, as one width or multiple and customizable widths.  Torque wrench included for the slot die assembly.

Extra supplies included for multiple stations of the System, including the cabinets and tables for their storage / display.  Two computers, one for process monitoring and one for data collection.

Main Components:

Omega #TVS-1008 Temperature and Air velocity controller interface for computer
Craftsman, torque wrench , clicker style Digi-click™
Tape Casting Warehouse In-line Filter Assembly
Custom Caster, custom, 24' length under glass, 18" feed, 4" exit, 18" web capable, electric motor drive + step-down regulators
Coast Controls Caster System, feed & rewind, with 3" diameter core air chucks
Premier Dies Slot Die, 14" wide, with stand, + spare parts
Keyence IL-1000 Laser Sensor, Intelligent-L
EFD 1000-XL Flow Controller, with foot pedal
Cole Palmer MI-150DGCP Illuminator, High intensity fiberlite
2) Keyence SJ-F2500 Ion anti-static fans
Marathon Electric G588DX Vacuum pump
Cole Palmer 75211-70 Gear Pump, 36-3600 rpm, 0.1 HP
Extech 407123 Anemometer, hot wire, in carrying case
Computer, HP laptop, Win 10 Casting, i5
Fisher Hamilton Stainless Steel table, 30" x 44", two door, rollers
Tol-O-Matic SRG-STD, 1-1, 3/4 X1 Gear Drive
Watlow PM6C1CH-AAAAAAA Watlow Heater controllers, (9 installed, 3 extra)
Orange dollie for slot die extra parts
HP Prodesk Computer, Monitor, Keyboard, mouse
Allen-Bradley 1606-XLP Allen Bradley power supply

NOTE: Lot #156 is pallet box of films on cores that could be used with this system.
NOTE: Lot #3 may be of interest for fabrication of hi-purity ceramic slurries for coating on this casting system.

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Special Terms Apply Please Read Payment & Removal Terms on Left of Screen Before Bidding:

Public Inspection: Friday June 26th 10:00 am - 4:00 pm

Removal: Facility open for item pickup on the following dates only July 13th-17th from 9:00am - 4pm daily If buyer fails to remove their items on those dates, they are at risk of forfeiting their purchases without refund.
 
Buyer's must come prepared to remove their purchases, there are no tools or laborers to assist with removal. Only some carts & pallet Jack are available

Local Riggers: Dan Brooks (716) 652-8121 or Rick Rusiniak (716) 444-6345

Payment: All invoices must be paid in full by July 13th failure to do so may result in restocking fees & forfeit of purchases

The facility has one ground level & dock level bay but the overhead door (12') will not accommodate the height of a semi-box truck, all equipment is located on 1st floor which has concrete floors for your forklift.

General Condition: The equipment in this auction is in very good operational condition, with much of it kept in cleanrooms, if any defects are know they will be in the lot description. None of the equipment was tested by the auctioneer.

All items are sold "AS IS" and you are encouraged to inspect on June 26th.

27' Casting / Deposition System for Thicker Films onto Web

Description:

Custom built system in Clean Room (invested $125,830)

Casting / Deposition System for Thicker Films onto Web
Custom-built Caster, 27' length x 18" bed under glass for controlled film drying conditions and cleanliness. Two different size Doctor Blade assemblies, 8" wide and 15" wide, which are accurately machined reservoirs for holding the coating material. An adjustable "gate" opening is the exit wall of the doctor blade, set for a pre-determined thickness coating on the web being pulled out of the reservoir for drying along the caster bed.  Granite plate at head of the caster is the accurate base for setting up the doctor blade assemblies and gate openings.  Feeler gages and other tools included on cabinet and tables used for storage and auction display.  De-air tank aids in removing bubbles from coating materials.

Main Components: 

Caster, custom, 24' length under glass, 18" feed, 4" exit, 18" web capable, electric motor drive + step-down regulators

Granite plate on entrance end of large caster, 24" x 18" (has crack)
Doctor Blade Assembly for casting, Custom, 8" wide, in plastic storage container
Doctor Blade Assembly for casting, Custom, 15" wide; between two cafeteria trays

 
NOTE: Lot #7 may be of interest for sintering of cast ceramic films requiring up to 1700°C firing on higher temperature capable kiln furniture.


NOTE: Lot # 163 is high purity, porous Alumina plates made from thick tape cast on this deposition system.

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Special Terms Apply Please Read Payment & Removal Terms on Left of Screen Before Bidding:

Public Inspection: Friday June 26th 10:00 am - 4:00 pm

Removal: Facility open for item pickup on the following dates only July 13th-17th from 9:00am - 4pm daily If buyer fails to remove their items on those dates, they are at risk of forfeiting their purchases without refund.
 
Buyer's must come prepared to remove their purchases, there are no tools or laborers to assist with removal. Only some carts & pallet Jack are available

Local Riggers: Dan Brooks (716) 652-8121 or Rick Rusiniak (716) 444-6345

Payment: All invoices must be paid in full by July 13th failure to do so may result in restocking fees & forfeit of purchases

The facility has one ground level & dock level bay but the overhead door (12') will not accommodate the height of a semi-box truck, all equipment is located on 1st floor which has concrete floors for your forklift.

General Condition: The equipment in this auction is in very good operational condition, with much of it kept in cleanrooms, if any defects are know they will be in the lot description. None of the equipment was tested by the auctioneer.

All items are sold "AS IS" and you are encouraged to inspect on June 26th.

EMI Mill, customized, 100-250 ml. chamber with spare parts

Invested $40,000

Description:

High Purity Ceramic Slurry mixing and milling
EMI mill interior 250 ml chamber has been custom modified to create a processing area that is free of metal contamination, for output of high purity ceramic slurry.  1 mm diameter Zirconia media is included, with mesh screen for separation of the media from finished slurry.  Unit can be adapted to a 100 ml chamber to run smaller quantities as desired.  The unit and its control box are mounted on a metal table.  PolyScience temperature bath ensures process temperature control. The arbor-#3 press aids in assembly and teardown of the mill chamber assembly. Spare parts and tools included in the under-desk cabinet, includes steel work table.
https://www.emimills.com

Main Components:

EMI Mill, customized, 100-250 ml. chamber with spare parts
PolyScience temperature bath
Arbor Press #3
Tosoh 1 mm media for EMI mill

NOTE: Lot # 4 may be considered for particle size analysis and Lot # 1 for ceramic tape casting.

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Special Terms Apply Please Read Payment & Removal Terms on Left of Screen Before Bidding:

Public Inspection: Friday June 26th 10:00 am - 4:00 pm

Removal: Facility open for item pickup on the following dates only July 13th-17th from 9:00am - 4pm daily If buyer fails to remove their items on those dates, they are at risk of forfeiting their purchases without refund.
 
Buyer's must come prepared to remove their purchases, there are no tools or laborers to assist with removal. Only some carts & pallet Jack are available

Local Riggers: Dan Brooks (716) 652-8121 or Rick Rusiniak (716) 444-6345

Payment: All invoices must be paid in full by July 13th failure to do so may result in restocking fees & forfeit of purchases

The facility has one ground level & dock level bay but the overhead door (12') will not accommodate the height of a semi-box truck, all equipment is located on 1st floor which has concrete floors for your forklift.

General Condition: The equipment in this auction is in very good operational condition, with much of it kept in cleanrooms, if any defects are know they will be in the lot description. None of the equipment was tested by the auctioneer.

All items are sold "AS IS" and you are encouraged to inspect on June 26th.

Horiba LA-960 Laser Scattering Particle Size Distribution Analyzer System

(Invested $50,350)

Description:

Particle Size Analyzer Station
Horiba unit, includes fraction cell kit and flowcell bridge kit, with storage cases for assembly parts.  Solvent usable.  Used in conjunction with the attritor mill to ensure the particle distribution meets the process criteria.  Small ultrasonic cleaner for the parts & steel work table.

Main Components:

Metallic work table, no drawer, supporting Horiba
Horiba LA-960 PSA model with fraction cell kit
Ultrasonic Cleaner, small, 60W
Horiba Fraction Cell Kit
Horiba Flowcell Bridge Kit

View Brochure via the Document tab

The following information was web sourced and may contain variances from the subject unit:

HORIBA Partica LA-960 Laser Scattering Particle Size Distribution Analyzer

This latest evolution in the LA series advances scientific knowledge for tomorrow’s world through intuitive software, unique accessories, and high performance.

The LA-960 continues HORIBA’s proud tradition of leading the industry with innovative design.

Performance that matters:

•Measure particle size between 10 nanometers and 5 millimeters
•State of the art nanoparticle measurement resolves peaks at 30 nanometers
•Suitable for suspensions, emulsions, powders, pastes, gels, and creams
•Easy to use dry powder accessory, read the PowderJet page for more information
•Requires only micrograms* of sample, minimizing cost of analysis
•Flexible, fully automated measurement sequences maximize precision and method compliance
•Excellent reproducibility and unit-to-unit agreement, read the Gage R&R Study for more information
•Measurements in less than 60 seconds boost productivity
•Based on the ultra-durable LA-950 platform, noted for its reliability

Software that grows to meet your needs
•New users are guided by the Method Expert software to create powerful measurement methods with no prior training
•Experienced users create turn-key measurements with the Sequence function to include custom messages, measurement averaging, pass/fail repeats, and much more
•Advanced users benefit the Intensity Graph, Custom Calculations, and other power tools to deeply understand their measurements
•The brand new user interface emphasizes ease of use to ensure hassle-free operation
•Integrated 21 CFR Part 11 compliant software available with user administration, audit trail, and electronic signature functionality

HORIBA's performance guarantee
•Guaranteed accuracy of ± 0.6%**
•Excellent unit-to-unit precision, ideal for multi-location requirements
•ISO 13320:2009 compliant
•IQ/OQ available
•LA-960 performance verified on every unit with NIST-traceable mono- and polydisperse size standards

Our particle expertise = your solution

HORIBA's experienced staff of technical and applications specialists support the LA-960 in 54 offices across 45 countries. We are committed to the satisfaction of our users and to the education of the greater industry and provide many channels of support including:
•Sample analysis via the many Applications Labs around the world
•Free software updates, webinars, technical notes, and much more in the Download Center
•Instant support via phone, e-mail, and online meeting
•On-site and in-house user training courses
•Service contracts, verifications, and validations to fit every requirement
•Advanced software tools to correlate data from other particle size analyzers to maintain historic specifications

 

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Special Terms Apply Please Read Payment & Removal Terms on Left of Screen Before Bidding:

Public Inspection: Friday June 26th 10:00 am - 4:00 pm

Removal: Facility open for item pickup on the following dates only July 13th-17th from 9:00am - 4pm daily If buyer fails to remove their items on those dates, they are at risk of forfeiting their purchases without refund.
 
Buyer's must come prepared to remove their purchases, there are no tools or laborers to assist with removal. Only some carts & pallet Jack are available

Local Riggers: Dan Brooks (716) 652-8121 or Rick Rusiniak (716) 444-6345

Payment: All invoices must be paid in full by July 13th failure to do so may result in restocking fees & forfeit of purchases

The facility has one ground level & dock level bay but the overhead door (12') will not accommodate the height of a semi-box truck, all equipment is located on 1st floor which has concrete floors for your forklift.

General Condition: The equipment in this auction is in very good operational condition, with much of it kept in cleanrooms, if any defects are know they will be in the lot description. None of the equipment was tested by the auctioneer.

All items are sold "AS IS" and you are encouraged to inspect on June 26th.

Deltec Top Hat furnace #1737  1600C capable & Transformer

(Invested $70,000)

Description:

Deltec top hat furnace with movable cart base, controller and transformer.  1600°C capable.  Roof rebuilt in 2019.  Internal base dimensions 20" x 34".  Power: 100 A
Comes with kiln furniture on the base cart and in plastic tub.  Extra heating elements and other spare parts for furnace included.

No Wall Disconnect Switch Included

NOTE: Lots # 9A and 9B may be considered for temperature profiling and measuring. 

NOTE: Lots #11 and #12 are kiln furniture for the Deltec furnaces.

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Special Terms Apply Please Read Payment & Removal Terms on Left of Screen Before Bidding:

Public Inspection: Friday June 26th 10:00 am - 4:00 pm

Removal: Facility open for item pickup on the following dates only July 13th-17th from 9:00am - 4pm daily If buyer fails to remove their items on those dates, they are at risk of forfeiting their purchases without refund.
 
Buyer's must come prepared to remove their purchases, there are no tools or laborers to assist with removal. Only some carts & pallet Jack are available

Local Riggers: Dan Brooks (716) 652-8121 or Rick Rusiniak (716) 444-6345

Payment: All invoices must be paid in full by July 13th failure to do so may result in restocking fees & forfeit of purchases

The facility has one ground level & dock level bay but the overhead door (12') will not accommodate the height of a semi-box truck, all equipment is located on 1st floor which has concrete floors for your forklift.

General Condition: The equipment in this auction is in very good operational condition, with much of it kept in cleanrooms, if any defects are know they will be in the lot description. None of the equipment was tested by the auctioneer.

All items are sold "AS IS" and you are encouraged to inspect on June 26th.

Deltec Top Hat Furnace #1738  1600C Capable & Transformer

Description:

Deltec top hat furnace with movable cart base, controller and transformer. 1600°C capable.  Roof rebuilt in 2019.  Internal base dimensions 20" x 34".  Power: 100 A
Comes with kiln furniture on the base cart. 

Invested $70,000.00

No Wall Disconnect Switch Included

NOTE: Lots # 9A and 9B may be considered for temperature profiling and measuring.

NOTE:  Lots #11 and #12 are kiln furniture for the Deltec furnaces.

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Special Terms Apply Please Read Payment & Removal Terms on Left of Screen Before Bidding:

Public Inspection: Friday June 26th 10:00 am - 4:00 pm

Removal: Facility open for item pickup on the following dates only July 13th-17th from 9:00am - 4pm daily If buyer fails to remove their items on those dates, they are at risk of forfeiting their purchases without refund.
 
Buyer's must come prepared to remove their purchases, there are no tools or laborers to assist with removal. Only some carts & pallet Jack are available

Local Riggers: Dan Brooks (716) 652-8121 or Rick Rusiniak (716) 444-6345

Payment: All invoices must be paid in full by July 13th failure to do so may result in restocking fees & forfeit of purchases

The facility has one ground level & dock level bay but the overhead door (12') will not accommodate the height of a semi-box truck, all equipment is located on 1st floor which has concrete floors for your forklift.

General Condition: The equipment in this auction is in very good operational condition, with much of it kept in cleanrooms, if any defects are know they will be in the lot description. None of the equipment was tested by the auctioneer.

All items are sold "AS IS" and you are encouraged to inspect on June 26th.

Deltec Top Hat furnace #1736  1700C capable & Transformer

(Invested $70,000)

Description:

Deltec top hat furnace with movable cart base, controller and transformer.  1700°C capable. Roof rebuilt in 2019.  Internal base dimensions 20" x 34".  Power: 100 A
Comes with kiln furniture on the base cart and in plastic tub.  Extra heating elements included.  Two pallets with higher temperature capable kiln furniture. Extra i2R heating elements included.

NO Wall Disconnect Switch Included

NOTE: Lots # 9A and 9B may be considered for temperature profiling and measuring.  Lots #11 and #12 are kiln furniture for the Deltec furnaces.

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Special Terms Apply Please Read Payment & Removal Terms on Left of Screen Before Bidding:

Public Inspection: Friday June 26th 10:00 am - 4:00 pm

Removal: Facility open for item pickup on the following dates only July 13th-17th from 9:00am - 4pm daily If buyer fails to remove their items on those dates, they are at risk of forfeiting their purchases without refund.
 
Buyer's must come prepared to remove their purchases, there are no tools or laborers to assist with removal. Only some carts & pallet Jack are available

Local Riggers: Dan Brooks (716) 652-8121 or Rick Rusiniak (716) 444-6345

Payment: All invoices must be paid in full by July 13th failure to do so may result in restocking fees & forfeit of purchases

The facility has one ground level & dock level bay but the overhead door (12') will not accommodate the height of a semi-box truck, all equipment is located on 1st floor which has concrete floors for your forklift.

General Condition: The equipment in this auction is in very good operational condition, with much of it kept in cleanrooms, if any defects are know they will be in the lot description. None of the equipment was tested by the auctioneer.

All items are sold "AS IS" and you are encouraged to inspect on June 26th.

Deltec Top Hat Furnace #1643  1600C Capable & Transformer

Description:

Deltec top hat furnace with controller and transformer.  1600°C capable. Roof rebuilt in 2019.  Internal base dimensions 16.5" x 16.5".  Power: 100 A
Comes with kiln furniture on the base and in plastic tubs. Extra heating elements i2R included.

(Invested $25,000)

NO WALL Disconnect Switch Included 


NOTE: Lots # 9A and 9B
may be considered for temperature profiling and measuring. 

Lots #11 and #12 are kiln furniture for the Deltec furnaces.

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Special Terms Apply Please Read Payment & Removal Terms on Left of Screen Before Bidding:

Public Inspection: Friday June 26th 10:00 am - 4:00 pm

Removal: Facility open for item pickup on the following dates only July 13th-17th from 9:00am - 4pm daily If buyer fails to remove their items on those dates, they are at risk of forfeiting their purchases without refund.
 
Buyer's must come prepared to remove their purchases, there are no tools or laborers to assist with removal. Only some carts & pallet Jack are available

Local Riggers: Dan Brooks (716) 652-8121 or Rick Rusiniak (716) 444-6345

Payment: All invoices must be paid in full by July 13th failure to do so may result in restocking fees & forfeit of purchases

The facility has one ground level & dock level bay but the overhead door (12') will not accommodate the height of a semi-box truck, all equipment is located on 1st floor which has concrete floors for your forklift.

General Condition: The equipment in this auction is in very good operational condition, with much of it kept in cleanrooms, if any defects are know they will be in the lot description. None of the equipment was tested by the auctioneer.

All items are sold "AS IS" and you are encouraged to inspect on June 26th.

Deltec Top Hat Furnace #1644  1600C Capable & Transformer

Description:

Deltec top hat furnace with controller and transformer.  1600°C capable. Roof rebuilt in 2019.  Internal base dimensions 16.5" x 16.5".  Power: 100 A
Comes with kiln furniture on the base and in plastic tub. Extra heating elements i2R included.

(Invested $25,000)

NO WALL Disconnect Switch Included

NOTE: Lots # 9A and 9B may be considered for temperature profiling and measuring. 

Lots #11 and #12 are kiln furniture for the Deltec furnaces.

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Special Terms Apply Please Read Payment & Removal Terms on Left of Screen Before Bidding:

Public Inspection: Friday June 26th 10:00 am - 4:00 pm

Removal: Facility open for item pickup on the following dates only July 13th-17th from 9:00am - 4pm daily If buyer fails to remove their items on those dates, they are at risk of forfeiting their purchases without refund.
 
Buyer's must come prepared to remove their purchases, there are no tools or laborers to assist with removal. Only some carts & pallet Jack are available

Local Riggers: Dan Brooks (716) 652-8121 or Rick Rusiniak (716) 444-6345

Payment: All invoices must be paid in full by July 13th failure to do so may result in restocking fees & forfeit of purchases

The facility has one ground level & dock level bay but the overhead door (12') will not accommodate the height of a semi-box truck, all equipment is located on 1st floor which has concrete floors for your forklift.

General Condition: The equipment in this auction is in very good operational condition, with much of it kept in cleanrooms, if any defects are know they will be in the lot description. None of the equipment was tested by the auctioneer.

All items are sold "AS IS" and you are encouraged to inspect on June 26th.

Thermocouples for Furnace Profiling in Large Plastic Tub

Description:

(6) Thermocouple, K-Type, the storage tub is full

(Invested $4,000)

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Special Terms Apply Please Read Payment & Removal Terms on Left of Screen Before Bidding:

Public Inspection: Friday June 26th 10:00 am - 4:00 pm

Removal: Facility open for item pickup on the following dates only July 13th-17th from 9:00am - 4pm daily If buyer fails to remove their items on those dates, they are at risk of forfeiting their purchases without refund.
 
Buyer's must come prepared to remove their purchases, there are no tools or laborers to assist with removal. Only some carts & pallet Jack are available

Local Riggers: Dan Brooks (716) 652-8121 or Rick Rusiniak (716) 444-6345

Payment: All invoices must be paid in full by July 13th failure to do so may result in restocking fees & forfeit of purchases

The facility has one ground level & dock level bay but the overhead door (12') will not accommodate the height of a semi-box truck, all equipment is located on 1st floor which has concrete floors for your forklift.

General Condition: The equipment in this auction is in very good operational condition, with much of it kept in cleanrooms, if any defects are know they will be in the lot description. None of the equipment was tested by the auctioneer.

All items are sold "AS IS" and you are encouraged to inspect on June 26th.

LOT: Omega Thermocouples/ Eurotherm controllers (2100 series) & Related

Omega Thermocouples for Measuring Internal Temperatures in Furnaces, Eurotherm controllers (2100 series) Watlow heaters, & Omega controllers

Description:

Contents of bench with large group of service stock with

3) Omega 76000 Temp./Process controllers

1) Omega HH21 Microprocessor Thermometer

1) OMEGA model HH23 Microprocessor Thermometer; SR# T-229385

1) Omega HH309A Data Logger Thermometer in carrying case with 4) sa1-k thermocouples and 2) 5 TC-GG-J-24-36 units

LOT: Omega Thermocouples for Measuring Internal Temperatures in Furnaces & Eurotherm controllers (2100 series)

4) Omega TC-08 Data Loggers

6) Omega Temperature Probes

4) Asst. Omega probes

Assorted TC wires

5) Eurotherm 2132I, 5 units, unopened

3) Used Eurotherm 3216 units

1) Used Eurotherm 2132 unit

3) Used Eurotherm 2132i units

(Invested $7,300.00)

 

 

 

Note: 1) Eurotherm #2404 controller & 1) power unit are marked AS IS or repair

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Special Terms Apply Please Read Payment & Removal Terms on Left of Screen Before Bidding:

Public Inspection: Friday June 26th 10:00 am - 4:00 pm

Removal: Facility open for item pickup on the following dates only July 13th-17th from 9:00am - 4pm daily If buyer fails to remove their items on those dates, they are at risk of forfeiting their purchases without refund.
 
Buyer's must come prepared to remove their purchases, there are no tools or laborers to assist with removal. Only some carts & pallet Jack are available

Local Riggers: Dan Brooks (716) 652-8121 or Rick Rusiniak (716) 444-6345

Payment: All invoices must be paid in full by July 13th failure to do so may result in restocking fees & forfeit of purchases

The facility has one ground level & dock level bay but the overhead door (12') will not accommodate the height of a semi-box truck, all equipment is located on 1st floor which has concrete floors for your forklift.

General Condition: The equipment in this auction is in very good operational condition, with much of it kept in cleanrooms, if any defects are know they will be in the lot description. None of the equipment was tested by the auctioneer.

All items are sold "AS IS" and you are encouraged to inspect on June 26th.

4 Cases Blasch Kiln Furniture

Description:

4 boxes of new Blasch Nitron Silicon Carbide kiln furniture for Furnaces in Lots # 5, 6 and 7.  16" x 18". Total of 147 boards.  Also one large lightweight furnace base board included.

(Invested $37,000)

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Special Terms Apply Please Read Payment & Removal Terms on Left of Screen Before Bidding:

Public Inspection: Friday June 26th 10:00 am - 4:00 pm

Removal: Facility open for item pickup on the following dates only July 13th-17th from 9:00am - 4pm daily If buyer fails to remove their items on those dates, they are at risk of forfeiting their purchases without refund.
 
Buyer's must come prepared to remove their purchases, there are no tools or laborers to assist with removal. Only some carts & pallet Jack are available

Local Riggers: Dan Brooks (716) 652-8121 or Rick Rusiniak (716) 444-6345

Payment: All invoices must be paid in full by July 13th failure to do so may result in restocking fees & forfeit of purchases

The facility has one ground level & dock level bay but the overhead door (12') will not accommodate the height of a semi-box truck, all equipment is located on 1st floor which has concrete floors for your forklift.

General Condition: The equipment in this auction is in very good operational condition, with much of it kept in cleanrooms, if any defects are know they will be in the lot description. None of the equipment was tested by the auctioneer.

All items are sold "AS IS" and you are encouraged to inspect on June 26th.

Stock Rack & Kiln Furniture

Description:

1) Chrome wire rack/cart 72" x 48" x 24" on 3"casters with Cleanroom cart cover with velcro closures & contents, with shelves of used low thermal mass kiln furniture

Invested $17,400.00

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Special Terms Apply Please Read Payment & Removal Terms on Left of Screen Before Bidding:

Public Inspection: Friday June 26th 10:00 am - 4:00 pm

Removal: Facility open for item pickup on the following dates only July 13th-17th from 9:00am - 4pm daily If buyer fails to remove their items on those dates, they are at risk of forfeiting their purchases without refund.
 
Buyer's must come prepared to remove their purchases, there are no tools or laborers to assist with removal. Only some carts & pallet Jack are available

Local Riggers: Dan Brooks (716) 652-8121 or Rick Rusiniak (716) 444-6345

Payment: All invoices must be paid in full by July 13th failure to do so may result in restocking fees & forfeit of purchases

The facility has one ground level & dock level bay but the overhead door (12') will not accommodate the height of a semi-box truck, all equipment is located on 1st floor which has concrete floors for your forklift.

General Condition: The equipment in this auction is in very good operational condition, with much of it kept in cleanrooms, if any defects are know they will be in the lot description. None of the equipment was tested by the auctioneer.

All items are sold "AS IS" and you are encouraged to inspect on June 26th.

Stock Rack & Kiln Furniture/Heavy Mass

Description:

1) Chrome wire rack/cart 72" x 48" x 24" on 3"casters with Cleanroom cart cover with velcro closures & contents, with shelves of used heavy thermal mass kiln furniture

(Invested $9,400.00) 

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Special Terms Apply Please Read Payment & Removal Terms on Left of Screen Before Bidding:

Public Inspection: Friday June 26th 10:00 am - 4:00 pm

Removal: Facility open for item pickup on the following dates only July 13th-17th from 9:00am - 4pm daily If buyer fails to remove their items on those dates, they are at risk of forfeiting their purchases without refund.
 
Buyer's must come prepared to remove their purchases, there are no tools or laborers to assist with removal. Only some carts & pallet Jack are available

Local Riggers: Dan Brooks (716) 652-8121 or Rick Rusiniak (716) 444-6345

Payment: All invoices must be paid in full by July 13th failure to do so may result in restocking fees & forfeit of purchases

The facility has one ground level & dock level bay but the overhead door (12') will not accommodate the height of a semi-box truck, all equipment is located on 1st floor which has concrete floors for your forklift.

General Condition: The equipment in this auction is in very good operational condition, with much of it kept in cleanrooms, if any defects are know they will be in the lot description. None of the equipment was tested by the auctioneer.

All items are sold "AS IS" and you are encouraged to inspect on June 26th.

JustRite Flammable Liquid Cabinet

#25730, 22 Gal. Capacity, steel construction

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Special Terms Apply Please Read Payment & Removal Terms on Left of Screen Before Bidding:

Public Inspection: Friday June 26th 10:00 am - 4:00 pm

Removal: Facility open for item pickup on the following dates only July 13th-17th from 9:00am - 4pm daily If buyer fails to remove their items on those dates, they are at risk of forfeiting their purchases without refund.
 
Buyer's must come prepared to remove their purchases, there are no tools or laborers to assist with removal. Only some carts & pallet Jack are available

Local Riggers: Dan Brooks (716) 652-8121 or Rick Rusiniak (716) 444-6345

Payment: All invoices must be paid in full by July 13th failure to do so may result in restocking fees & forfeit of purchases

The facility has one ground level & dock level bay but the overhead door (12') will not accommodate the height of a semi-box truck, all equipment is located on 1st floor which has concrete floors for your forklift.

General Condition: The equipment in this auction is in very good operational condition, with much of it kept in cleanrooms, if any defects are know they will be in the lot description. None of the equipment was tested by the auctioneer.

All items are sold "AS IS" and you are encouraged to inspect on June 26th.

Thermolyne Barnstead 48000 benchtop furnace

Description:

Thermolyne Barnstead 48000 benchtop furnace on steel table; 1200C capable, with computer for programming and data logging. Used to burn off all organic materials for solids determination testing.

With Dell Vostro laptop, data logging & programming on Thermolyne

Includes S/S Work Table 72" x 48" x 24"

(Invested $3,600)

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Special Terms Apply Please Read Payment & Removal Terms on Left of Screen Before Bidding:

Public Inspection: Friday June 26th 10:00 am - 4:00 pm

Removal: Facility open for item pickup on the following dates only July 13th-17th from 9:00am - 4pm daily If buyer fails to remove their items on those dates, they are at risk of forfeiting their purchases without refund.
 
Buyer's must come prepared to remove their purchases, there are no tools or laborers to assist with removal. Only some carts & pallet Jack are available

Local Riggers: Dan Brooks (716) 652-8121 or Rick Rusiniak (716) 444-6345

Payment: All invoices must be paid in full by July 13th failure to do so may result in restocking fees & forfeit of purchases

The facility has one ground level & dock level bay but the overhead door (12') will not accommodate the height of a semi-box truck, all equipment is located on 1st floor which has concrete floors for your forklift.

General Condition: The equipment in this auction is in very good operational condition, with much of it kept in cleanrooms, if any defects are know they will be in the lot description. None of the equipment was tested by the auctioneer.

All items are sold "AS IS" and you are encouraged to inspect on June 26th.

Brookfield Synchro-Lectric Viscometer

Viscometer w/SSA, rotary and case, plus some accessories

(List $1,500)

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Special Terms Apply Please Read Payment & Removal Terms on Left of Screen Before Bidding:

Public Inspection: Friday June 26th 10:00 am - 4:00 pm

Removal: Facility open for item pickup on the following dates only July 13th-17th from 9:00am - 4pm daily If buyer fails to remove their items on those dates, they are at risk of forfeiting their purchases without refund.
 
Buyer's must come prepared to remove their purchases, there are no tools or laborers to assist with removal. Only some carts & pallet Jack are available

Local Riggers: Dan Brooks (716) 652-8121 or Rick Rusiniak (716) 444-6345

Payment: All invoices must be paid in full by July 13th failure to do so may result in restocking fees & forfeit of purchases

The facility has one ground level & dock level bay but the overhead door (12') will not accommodate the height of a semi-box truck, all equipment is located on 1st floor which has concrete floors for your forklift.

General Condition: The equipment in this auction is in very good operational condition, with much of it kept in cleanrooms, if any defects are know they will be in the lot description. None of the equipment was tested by the auctioneer.

All items are sold "AS IS" and you are encouraged to inspect on June 26th.

Ohaus #MB120 Moisture Balance

120V with some accessories shown 

(List $1,450)

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Special Terms Apply Please Read Payment & Removal Terms on Left of Screen Before Bidding:

Public Inspection: Friday June 26th 10:00 am - 4:00 pm

Removal: Facility open for item pickup on the following dates only July 13th-17th from 9:00am - 4pm daily If buyer fails to remove their items on those dates, they are at risk of forfeiting their purchases without refund.
 
Buyer's must come prepared to remove their purchases, there are no tools or laborers to assist with removal. Only some carts & pallet Jack are available

Local Riggers: Dan Brooks (716) 652-8121 or Rick Rusiniak (716) 444-6345

Payment: All invoices must be paid in full by July 13th failure to do so may result in restocking fees & forfeit of purchases

The facility has one ground level & dock level bay but the overhead door (12') will not accommodate the height of a semi-box truck, all equipment is located on 1st floor which has concrete floors for your forklift.

General Condition: The equipment in this auction is in very good operational condition, with much of it kept in cleanrooms, if any defects are know they will be in the lot description. None of the equipment was tested by the auctioneer.

All items are sold "AS IS" and you are encouraged to inspect on June 26th.

Brookfield Model DV2TLVTJO Digital Viscometer & Related

Brookfield Model DV2TLVTJO Digital Viscometer, with a UL adapter kit to measure slurry viscometer and an SSA adapter kit to measure homogenized slip viscosity. With PolyScience #MXO7R-20-A11B bath for temperature control. Accessories and case. View images.

(Invested $7,000)

The following information was web sourced and may contain variances from the subject unit:

Brookfield DV2T Touch Screen Viscometer

The New DV2T Viscometer features a 5-inch color display to guide users through test creation and data gathering for fast and easy viscosity measurements. The DV2T also offers powerful new programming capabilities and results analysis including data averaging and QC limits with alarms. User instructions with multi-step test protocols can be created using the new Program Generator Software and uploaded to the DV2T through a USB Flash Drive (both included with instrument). Test Data can be recorded directly on a local printer or sent to a PC.  Additional automated control and data collection can be achieved with optional RheocalcT software.

FEATURES AND BENEFITS

5-inch full color, touch screen display supports multiple languages
•Displayed info includes: viscosity (cP/mP·s), temperature (°C/°F), shear rate/stress, % torque, spindle/speed, step program status
•Enhanced Security provides enhanced security with customizable user levels & password access to comply with regulatory requirements such as 21 CFR Part 11.
•Built-In options include timed tests, data averaging, programmable QC limits/alarms, customizable speed/spindle lists, on screen data comparison
•Auto range shows maximum viscosity measured with any spindle/speed combination
•USB PC interface provides optional computer control and automatic data gathering capability Download custom test programs with included PG Flash software

•Front-facing bubble level for convenient viewing
•Built-in temperature probe
•Accuracy of ±1.0% of range with displayed test data
•Repeatability of ±0.2%
•NIST traceable viscosity standards available
•Also available: New magnetic coupling system, durable ball bearing suspension system, quick action lab stand and RheocalcT software.

Each of our standard Laboratory Viscometers/ Rheometers are supplied with an internal spring used to calculate the viscosity of a material. These springs have different measuring capabilities:

LV is for low viscosity materials and can measure the thinnest materials. Typical examples include inks, oils, and solvents.
RV is for medium viscosity materials than those measured with an LV torque. Typical examples include creams, food, and paints.
HA is for higher viscosity materials than those measured with an RV torque. Typical examples include gels, chocolate and epoxies.
HB is for even higher viscosity materials than those measured with an HA torque spring. Typical examples include asphalt, caulking compounds, and molasses.

VISCOSITY RANGE
cP (mPa•s) DV2TLV  MIN. 1†, MAX.  6M, RPM  .1-200, NUMBER OF INCREMENTS  200 

SPRING TORQUE
MODEL DV2TLV,   Dyne-cm 673.7,  Milli Newton-m 0.0673
† 1 cP achieved with UL Adapter accessory. 15 cP on LV with standard spindles.
 ††Minimum viscosity is achieved with optional RV/HA/HB spindle.
 M=1 million cP=Centipoise mPa·s=Millipascal·seconds

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Special Terms Apply Please Read Payment & Removal Terms on Left of Screen Before Bidding:

Public Inspection: Friday June 26th 10:00 am - 4:00 pm

Removal: Facility open for item pickup on the following dates only July 13th-17th from 9:00am - 4pm daily If buyer fails to remove their items on those dates, they are at risk of forfeiting their purchases without refund.
 
Buyer's must come prepared to remove their purchases, there are no tools or laborers to assist with removal. Only some carts & pallet Jack are available

Local Riggers: Dan Brooks (716) 652-8121 or Rick Rusiniak (716) 444-6345

Payment: All invoices must be paid in full by July 13th failure to do so may result in restocking fees & forfeit of purchases

The facility has one ground level & dock level bay but the overhead door (12') will not accommodate the height of a semi-box truck, all equipment is located on 1st floor which has concrete floors for your forklift.

General Condition: The equipment in this auction is in very good operational condition, with much of it kept in cleanrooms, if any defects are know they will be in the lot description. None of the equipment was tested by the auctioneer.

All items are sold "AS IS" and you are encouraged to inspect on June 26th.

Ohaus Explorer balance, Model EX324

Description:

Ohaus Explorer balance, Model EX324, 320g weight limit, 0.0001 gram readability, with weight set

(Invested $6,740)

The OHAUS Explorer Series of analytical balances combine modern features and design elements to offer unmatched functionality in a line of high-performance balances unlike any other on the market. These smart and intuitive balances and all of their intelligent features simplify even the most complex laboratory measurements.

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Special Terms Apply Please Read Payment & Removal Terms on Left of Screen Before Bidding:

Public Inspection: Friday June 26th 10:00 am - 4:00 pm

Removal: Facility open for item pickup on the following dates only July 13th-17th from 9:00am - 4pm daily If buyer fails to remove their items on those dates, they are at risk of forfeiting their purchases without refund.
 
Buyer's must come prepared to remove their purchases, there are no tools or laborers to assist with removal. Only some carts & pallet Jack are available

Local Riggers: Dan Brooks (716) 652-8121 or Rick Rusiniak (716) 444-6345

Payment: All invoices must be paid in full by July 13th failure to do so may result in restocking fees & forfeit of purchases

The facility has one ground level & dock level bay but the overhead door (12') will not accommodate the height of a semi-box truck, all equipment is located on 1st floor which has concrete floors for your forklift.

General Condition: The equipment in this auction is in very good operational condition, with much of it kept in cleanrooms, if any defects are know they will be in the lot description. None of the equipment was tested by the auctioneer.

All items are sold "AS IS" and you are encouraged to inspect on June 26th.

Acculab ALC-3100.2 Scale

Description:

Acculab® - ALC-3100.2 - Precision Balance, 3100g max ($1,100 List)

Special Features:

  • RS-232 bi-directional interface for connection to computer or printer
  • Lock-down capability
  • Four selectable application programs
  • 20 different weighing modes
  • Large LCD display
  • Stainless steel weighing platform
  • Simple "one button" external calibration
  • Piece counting (5, 10, 20, 50, 100 selectable reference sampling)
  • Percent weighing for solids, moisture loss, formulation, quality control
  • Averaging for unstable ambient conditions
  • Net totaling for formulation
  • User selectable two unit toggling
  • Advanced microprocessor for accurate weighing results, digital filtering and fast stabilization

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Special Terms Apply Please Read Payment & Removal Terms on Left of Screen Before Bidding:

Public Inspection: Friday June 26th 10:00 am - 4:00 pm

Removal: Facility open for item pickup on the following dates only July 13th-17th from 9:00am - 4pm daily If buyer fails to remove their items on those dates, they are at risk of forfeiting their purchases without refund.
 
Buyer's must come prepared to remove their purchases, there are no tools or laborers to assist with removal. Only some carts & pallet Jack are available

Local Riggers: Dan Brooks (716) 652-8121 or Rick Rusiniak (716) 444-6345

Payment: All invoices must be paid in full by July 13th failure to do so may result in restocking fees & forfeit of purchases

The facility has one ground level & dock level bay but the overhead door (12') will not accommodate the height of a semi-box truck, all equipment is located on 1st floor which has concrete floors for your forklift.

General Condition: The equipment in this auction is in very good operational condition, with much of it kept in cleanrooms, if any defects are know they will be in the lot description. None of the equipment was tested by the auctioneer.

All items are sold "AS IS" and you are encouraged to inspect on June 26th.

Troemner 1Kg, calibration weight (traceable)

Comes with hard case & glove, (List $400)

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Special Terms Apply Please Read Payment & Removal Terms on Left of Screen Before Bidding:

Public Inspection: Friday June 26th 10:00 am - 4:00 pm

Removal: Facility open for item pickup on the following dates only July 13th-17th from 9:00am - 4pm daily If buyer fails to remove their items on those dates, they are at risk of forfeiting their purchases without refund.
 
Buyer's must come prepared to remove their purchases, there are no tools or laborers to assist with removal. Only some carts & pallet Jack are available

Local Riggers: Dan Brooks (716) 652-8121 or Rick Rusiniak (716) 444-6345

Payment: All invoices must be paid in full by July 13th failure to do so may result in restocking fees & forfeit of purchases

The facility has one ground level & dock level bay but the overhead door (12') will not accommodate the height of a semi-box truck, all equipment is located on 1st floor which has concrete floors for your forklift.

General Condition: The equipment in this auction is in very good operational condition, with much of it kept in cleanrooms, if any defects are know they will be in the lot description. None of the equipment was tested by the auctioneer.

All items are sold "AS IS" and you are encouraged to inspect on June 26th.

Mettler Toledo® MS12002TS/00 Precision Balance 12200 g x 0.01 g

($4,100 List)

Comes with weighing paper & Pycnometer Cup 8.32 ml

The following information is web based and may contain variances from the subject unit:

Features

MS-TS Analytical Balances Trusted Performance

The built-in security features on MS-TS analytical balances ensure results are always valid. Operators receive a warning if any problems are encountered or tolerances are not adhered to. Corrective actions can be taken immediately, avoiding costly reworking later.

LevelControl, MinWeigh and automatic internal adjustment with FACT support compliance with regulations. The ISOLog function maintains a record of all weighing relevant changes to the balance’s settings. For additional security, settings can be passcode protected.

The 7" extra-large color TFT touchscreen display is operable through cotton, silicon and rubber gloves. An intuitive user interface and 18mm high digits bring comfort to your daily tasks.

Built-in function simplifies balance leveling MS-TS Analytical Balances include built-in LevelControl function that issues a warning when the balance is not level and provides onscreen guidance to help you level the balance correctly within seconds.

Trusted Results at Your Fingertips MS-TS balances are reassuringly easy to use and fully support lean processes in the laboratory and on the factory floor.

  • Large color touchscreen – comfortable operation
  • Built-in applications – simplified processes
  • Warning functions – valid results

Increase Your Productivity with Convenient Applications and Easy-to-Read Graphics 11 built-in applications, including differential weighing, density determination and formulation, guide you step by step through your weighing procedures, support you with data management and help improve process security. Evaluate your results easily with the statistics function and on-screen charts.

Free Application Note: Easy Differential Weighing The new application note on how the built-in application greatly simplifies the differential weighing of a sample series before and after being in a drying oven.

MinWeigh function ensures process tolerances The display digits turn red if the net sample is below a pre-programmed minimum value. Selection between a customized or certficated MinWeigh method is possible.

Passcodes protect balance settings Create a passcode to restrict modification of balance settings to authorized personnel only – functions that affect metrological performance are protected against accidental alteration

Optimized display makes daily tasks easier The 7" extra-large color TFT touchscreen display is operable through cotton, silicone and latex gloves. An intuitive user interface and 18mm high digits bring comfort to your daily tasks.

Up to 4 IDs per sample ensures traceability Enter up to 4 IDs per sample using the built-in touchpad or a barcode reader for fast and reliable traceability (e.g. user, sample, batch etc.).

Easy-cleaning features save time and effort The QuickLock draft shield dismantles in seconds without any tools and all parts are dishwasher proof. Surfaces are smooth and rounded to make cleaning easy.

Get connected for easy data handling USB Host, USB Device, RS232, Bluetooth (optional) Built-in PC Direct function – easy data transfer without PC software.

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Special Terms Apply Please Read Payment & Removal Terms on Left of Screen Before Bidding:

Public Inspection: Friday June 26th 10:00 am - 4:00 pm

Removal: Facility open for item pickup on the following dates only July 13th-17th from 9:00am - 4pm daily If buyer fails to remove their items on those dates, they are at risk of forfeiting their purchases without refund.
 
Buyer's must come prepared to remove their purchases, there are no tools or laborers to assist with removal. Only some carts & pallet Jack are available

Local Riggers: Dan Brooks (716) 652-8121 or Rick Rusiniak (716) 444-6345

Payment: All invoices must be paid in full by July 13th failure to do so may result in restocking fees & forfeit of purchases

The facility has one ground level & dock level bay but the overhead door (12') will not accommodate the height of a semi-box truck, all equipment is located on 1st floor which has concrete floors for your forklift.

General Condition: The equipment in this auction is in very good operational condition, with much of it kept in cleanrooms, if any defects are know they will be in the lot description. None of the equipment was tested by the auctioneer.

All items are sold "AS IS" and you are encouraged to inspect on June 26th.

Mettler Toledo 5EZPlus pH Meter & Related

Comes with sensor and accessories in the photos ($900 List)

The following information was web sourced and may contain variances for the subject unit: Brochure available through document tab

Compact, benchtop meter provides high quality pH/mV measurements with simple click of a button

Description

  • Compact, space saving design with ABS housing
  • Remove sensor holder after use and store on the side of the meter
  • Large, well-structured 4.3 in. segmented LCD display for easy viewing
  • Intuitive button arrangement and simple menu for easy operation
  • RS232 or USB ports to export data directly either to a printer or a PC for further processing
  • ATC and MTC temperature compensation
  • Five point (max.) linear/segmented calibration with four predefined buffer groups
  • BNC, Cinch, NTC 30kiloOhm sensor inputs
  • Features Automatic and manual endpoint recording, Acoustic endpoint signal, Visual endpoint signal
  • Ideal for wide range of laboratory applications

Specifications:

  • pH Range: -2.00 to 16.00
  • pH Resolution: 0.01/0.1
  • pH Accuracy: ±:0.01
  • mV Range: 2000 to 2000mv
  • mV Resolution: 1mV
  • mV Accuracy: ±1mV
  • Temperature Range: -5° to +105°C (23° to 221°F)
  • Temperature Resolution: 0.1°C
  • Temperature Accuracy: 0.3°C
  • Memory Size: 200 measurements, current calibration
  • Power Supply: 100 to 240V, 50/60Hz, 12 VDC

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.


Please wait...