Item Description:

Interested in Financing? Click here 
**Financing is offered by a third party entity. The sale of this piece is not contingent upon the bidder/buyer securing financing. This is simply offered as a courtesy. 

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

• Year: 1999
• Make: Daewoo
• Model: Mega 250-3
• Body Style: Wheel Loader
• VIN/SN: 1117
• Hours: True Hours Unknown
• Engine Make/Model: Daewoo
• Cyl: 6
• Fuel Type: Diesel
• Transmission Type: Hydrostatic
• Single Axle/Dual Axle: Single Axle
• Tire Size/Type: 20.5/25.00
• Tire Condition: Fair
• Drivetrain: AWD
• Does the unit operate?: Yes
• Does the vehicle start?: Yes
• Are keys available?: Yes
• Ownership Documents: Bill of Sale Only
• Mechanical Condition: Good
• Mechanical Notes: Runs and drive as it should. Original hour meter stopped working around 3400. Believed total hours 4500-5000, 24 volt. third valve hydraulics.
• Body Condition: Good
• Body Notes: Fresh paint, has a JBR Quick Attach 3 yard general purpose bucket.
• Interior Condition: Good
• Misc Info: Bought from local municipality 15 years ago. Used for snow removal only, since. Has stock heater, auxiliary heater, and aux defrost heater.
• Titled: No

Item Description:

Interested in Financing? Click here 
**Financing is offered by a third party entity. The sale of this piece is not contingent upon the bidder/buyer securing financing. This is simply offered as a courtesy. 

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

• Fleet #: 221489
• Year: 1999
• Make: Komatsu
• Model: WA250-3
• Body Style: Wheel Loader
• VIN/SN: 71699
• Hours: 8350
• Engine Make/Model: Komatsu
• Cyl: 6
• Fuel Type: Diesel
• Transmission Type: Hydrostatic
• Single Axle/Dual Axle: Single Axle
• Tire Size/Type: 17.5-25
• Tire Condition: Fair
• Drivetrain: AWD
• Does the unit operate?: Yes
• Does the vehicle start?: Yes
• Are keys available?: Yes
• Ownership Documents: Bill of Sale Only
• Mechanical Condition: Good
• Mechanical Notes: Loader runs and drives. No significant leaks. ACS quick attach but no bucket included.
• Body Condition: Good
• Body Notes: Quick attach snow pusher mount shown in pics is included.
• Interior Condition: Fair
• Misc Info: Video of it in operation available on request. Contact seller for specs on motor.
• Titled: No

Item Description:

Interested in Financing? Click here 
**Financing is offered by a third party entity. The sale of this piece is not contingent upon the bidder/buyer securing financing. This is simply offered as a courtesy. 

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

• Fleet #: 22150
• Year: 1999
• Make: Komatsu
• Model: WA250-3
• Body Style: Wheel Loader
• VIN/SN: 70434
• Hours: 7520
• Engine Make/Model: Komatsu
• Cyl: 6
• Fuel Type: Diesel
• Transmission Type: Hydrostatic
• Single Axle/Dual Axle: Single Axle
• Tire Size/Type: 17.5-25
• Tire Condition: Fair
• Drivetrain: AWD
• Does the unit operate?: Yes
• Does the vehicle start?: Yes
• Are keys available?: Yes
• Ownership Documents: Bill of Sale Only
• Mechanical Condition: Good
• Mechanical Notes: No significant leaks or known issues. JRB quick attach but no bucket included. Quick attach snow pusher mount shown in pics is included but not the snow pusher Blade.
• Body Condition: Good
• Body Notes: Good outward appearance.
• Interior Condition: Good
• Misc Info: Video of it in operation available on request. NOTE: Protech Snow Pusher is NOT INCLUDED. Contact seller for motor and spec details.
• Titled: No

Item Description:

9' Fisher MC Snow Plow

Fisher Municipal Series 9' MC Snow Plow

Not a standard pick up plow

It is taller and heavier

The MC series was made for use on medium sized trucks such as F550 & F650

Plow does not include truck side mounts or electronics

Only what's pictured in photos

Light use on this plow and in excellent condition

Never installed

Tested it when purchased several years ago

Not used since

Unknown current working condition.

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Item Description:

18' Snow Pusher

Appears to have been a Protech when new

Has been modified and reinforced over time

Rubber cutting edge in good useable condition

Ready to go to work.

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Item Description:

20' Protech Snow Pusher #1

Newer paint

Rubber cutting edge in good useable condition

Ready to go to work.

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Item Description:

20' Protech Snow Pusher #2 

Original Paint

No damage history

Like new rubber cutting edge, recently replaced

Top side unused

Ready for work.

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Item Description:

10' Back Drag Blade ACS Quick Attach

Custom Built 10' Back Drag Blade

Shop built to fit loaders with ACS

Quick attach and used for back blading doorways

Steel cutting edge and steel construction

Ready to go to work.

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Item Description:

Interested in Financing? Click here 
**Financing is offered by a third party entity. The sale of this piece is not contingent upon the bidder/buyer securing financing. This is simply offered as a courtesy. 

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

• Year: 2012
• Make: Ford
• Model: F250
• Body Style: Extended Cab Pickup with Plow
• VIN/SN: 1FT7X2B60CEB82247
• Odometer Numbers: 196264
• Engine Make/Model: 6.2
• Cyl: 8
• Fuel Type: Gas
• Transmission Type: Auto
• Single Axle/Dual Axle: Single Axle
• Tire Size/Type: 245/75/R17
• Tire Condition: Fair
• Plow Size: 8.5'
• Drivetrain: 4WD
• Does the unit operate?: Yes
• Does the vehicle start?: Yes
• Are keys available?: Yes
• Ownership Documents: Clear Title
• Mechanical Condition: Good
• Mechanical Notes: Manual lockout hubs. Runs and drives as should. No known issues.Truck and Plow was used regularly last season.
• Body Condition: Fair
• Body Notes: Extended cab with Stainless Steel Fisher 8.5' V-Plow. Some visible rust. Very little summer use and plow was installed on truck this fall but not tested.
• Interior Condition: Fair
• Titled: Yes
• GVWR: 10,000

Item Description:

Interested in Financing? Click here 
**Financing is offered by a third party entity. The sale of this piece is not contingent upon the bidder/buyer securing financing. This is simply offered as a courtesy. 

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

• Fleet #: 728
• Year: 2016
• Make: Ford
• Model: F250
• Body Style: Pickup Truck with Plow
• VIN/SN: 1FTBF2B64GEA95258
• Odometer Numbers: 77,675
• Engine Make/Model: 6.2
• Cyl: 8
• Fuel Type: Gas
• Transmission Type: Auto
• Single Axle/Dual Axle: Single Axle
• Tire Size/Type: 245/75/17
• Tire Condition: Fair
• Drivetrain: 4WD
• Does the unit operate?: Yes
• Does the vehicle start?: Yes
• Are keys available?: Yes
• Ownership Documents: Clear Title
• Mechanical Condition: Good
• Mechanical Notes: Manual lock out hubs. Runs and drives as should. No known issues. Truck and plow was used regularly last season. Very little summer use and plow was installed on truck this fall but not tested.
• Body Condition: Good
• Body Notes: Fisher 8.5 V Plow is painted steel. Some visible body rust.
• Interior Condition: Good
• Misc Info: Truck was bought originally as an accident salvage. It was repaired and re-titled Salvage Rebuilt.
• Titled: Yes
• GVWR: 10,000

Item Description:

JRB Loader Power 18' Angle Snow Pusher

#8 Metalpess Style Wheel Loader Snow Pusher

18' width at full extension

(2) 3' wings that tip forward to make a scoop

12' Main blade section that power angles

Requires only one remote hydraulic circuit to operate

Has electric switch over circuit to operate second function from first hydraulic circuit

JRB quick coupler that fits the Daewoo Mega 250 selling as lot 1 in this auction

Blade operates as it should

Cutting edge is damaged and will require repair for proper scraping operation.

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Item Description:

Smith Electric 6' Stainless Steel Salter

Model 100DF

6' length is made for short bed trucks

Salter is complete but has not been used in several years

Mfg. 1/06

Serial #8846

Unknown if operational as it sits

May need attention

Mounted to fork tubes for easy loading

Salter is mounted to a Steel Fork frame that is not included

Will be removed from frame before pick up.

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Item Description:

Ariens Deluxe 24" Walk Behind Snow Blower

Bought new several years ago

Used in commercial snow operation for walkway clearing

Was used last season

Did not start when tried

May need minor work.

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Item Description:

Lesco 8' Stainless Steel Electric Salter

Model L 

Mounted to steel forklift skid

Unit worked when last used, not tested

We believe it was manufactured for Lesco by Airflow

Salter is mounted to a steel fork frame that is not included

Will be removed from frame before pick up

Item is used and in unknown working condition. 

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Item Description:

Smith Metal Works 8' Electric Stainless Steel Salter

MFG. 8/07

Model #175S4

Serial #8644

Twin motor with side curtains for pickup mounting

Salter is mounted to a Steel Fork frame that is not included

Will be removed from frame before pick up

Unit worked when last used, not currently tested

Item is used and in unknown working condition. 

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Item Description:

Smith Metal Works 8' Electric Stainless Steel Salter

Mfg 7/05

Model #175DF4

Serial#9155

Twin motor with side curtains for pickup mounting

No top grate found with this unit

If found will be included

Salter is mounted to a steel fork frame that is not included

Will be removed from frame before pick up

Unit worked when last used

Used winter 2022 not currently tested

Item is used and in unknown working condition. 

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Item Description:

Harder 8' Electric Stainless Steel Salter

Single motor design adapted to a PTO shaft spinner

Spinner mounts separately in two

Receiver hitch and is shaft driven from motor

This was a shop-built design that worked well

Unit worked when last used (winter 2022)

Salter is mounted to a steel fork frame that is not included

Will be removed from frame before pick up

Not currently tested

Item is used and in unknown working condition. 

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Item Description:

Smith Metal Works 8' Electric Stainless Steel Salter

Mfg 8/07

Twin motor with side curtains for pickup mounting

Salter is mounted to a steel fork frame that is not included

Will be removed from frame before pick up

Unit that worked when last used, not currently tested

Item is used and in unknown working condition. 

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Item Description:

Swenson Brand 10' Hydraulic Stainless Steel Salt/Sand Spreader

For medium to heavy duty truck

New apron chain, spinner, and spinner motor

This was used as a primary unit in winter 2022

Spinner mounts separately to 2" receiver

Working condition.

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.