Twitter Google Email Pinterest Facebook

Business Surplus-NY #36542

All items closed
Page 1 of 1    REFRESH PAGE
Grid with imagesList view
Page 1 of 1    REFRESH PAGE
Grid with imagesList view
You can enter a new max bid at any time by entering a bid greater than your current high bid.
A max bid would make it more difficult for others to outbid you.

A max bid is the highest amount you are willing to pay for an auction item.

In response to other bids, the auction system will automatically increase your bid in the smallest increment possible (up to your max bid amount) in order to maintain your lead position.

To get a max bid you simply enter the maximum amount you are willing to pay into the bid form just as you would any other bid. If your bid is more than one bidding increment above the current high bid you will get a max bid unless another bidder has a max bid in place that is higher than the amount you enter.

At the end of the auction, the winning bidder pays only the lowest winning bid possible. That means that you can win an auction item at a price less than your max bid amount.

Your max bid amount is kept confidential from other bidders.

You can lower or delete a max bid by entering a lower amount.

You now have a max bid.

You can raise or lower your max bid at any time by entering a new amount.

If you wish to remove your max bid you can do so by entering an amount equal to the current bid into the bid form.

You have a max bid of %s on this item. That means that the system will place bids for you in response to bids from other bidders, up to %s.

You can adjust this max bid by using the form above.

If you want to remove your max bid click here.
You can add a max bid to protect your item against other bidders by using the form above.
Place a bid using the form above.

You can enter the minimum bid of %s or a greater amount.

If you bid more than the minimum bid you will get a max bid that the system will use to bid for you against other bidders, up to the amount you enter. So if you enter a bid of %s for this item, the system will place bids on your behalf in response to bids from other users until someone bids more than %s.
LowHighIncrement
$0.00$8.99$0.10
$9.00$39.99$1.00
$40.00$99.99$2.50
$100.00$199.99$5.00
$200.00$999.99$10.00
$1,000.00$2,499.99$25.00
$2,500.00$4,999.99$50.00
$5,000.00$1,000,000,000.00$100.00
LowHighIncrement
$0.00$100,000,000.00$1.00
Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

  • Year: 2013
  • Make: Weber
  • Model: TRC 86
  • Body Style: Trench Roller
  • VIN/SN: 3100875
  • Hours: 59
  • Engine Make/Model: Lombardini LDW 1003, 1.3L, 26.7HP, water cooled
  • Cyl: 3
  • Fuel Type: Diesel
  • Transmission Model: Forward/Reverse
  • Transmission Type: Hydrostatic
  • Single Axle/Dual Axle: Single Axle, 4 sheep foot drum type, steel
  • Tire Size/Type: 34"W per drum, solid with average surface rust
  • Tire Condition: Good
  • Drivetrain: AWD
  • Does the unit operate?: Yes
  • Does the vehicle start?: Yes
  • Are keys available?: Yes
  • Ownership Documents: Bill of Sale Only
  • Mechanical Condition: Good
  • Mechanical Notes: Fleet maintained.
  • Body Condition: Fair
  • Body Notes: Fair to good, solid with average rust and wear, view images.
  • Interior Condition: N/A
  • Misc Info: It comes with wireless remote control, working speed 0-56/0-48 feet per minute depending on soil, grade ability 50%, frequency is 32, amplitude 1.70mm, compaction force 16,860Lbs, comes with remote radio control system allowing the operator to control the compactor from a safe distance. The document tab has a brochure of a similar unit for your review.
  • GVWR: Operational weight 3065Lbs
Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

  • Make: Bobcat
  • Model: MT55
  • Body Style: Mini Track Loader
  • VIN/SN: 538712312
  • Hours: 2382
  • Engine Make/Model: Kubota #D902 18.5kW
  • Cyl: 3
  • Fuel Type: Diesel
  • Transmission Model: F/R fast & slow, travel speed 3.5MPH
  • Transmission Type: Hydrostatic
  • Single Axle/Dual Axle: Dual Tracks
  • Tire Size/Type: 10"W rubber
  • Tire Condition: Fair
  • Drivetrain: AWD
  • Does the unit operate?: Yes
  • Does the vehicle start?: Yes
  • Are keys available?: Yes
  • Ownership Documents: Bill of Sale Only
  • Mechanical Condition: Good
  • Mechanical Notes: Fleet maintained.
  • Body Condition: Fair
  • Body Notes: Solid with average rust and wear, view images.
  • Interior Condition: N/A
  • Misc Info: No attachments are included in this lot. It has auxiliary circuits for attachments and front hydraulic ports, lift-arm support.
  • GVWR: Operating weight 261Lbs
Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

  • Make: Bobcat
  • Model: MT55
  • Body Style: Mini Track Loader
  • VIN/SN: 538712311
  • Hours: 2227
  • Engine Make/Model: Kubota type D902 18.5kw
  • Cyl: 3
  • Fuel Type: Diesel
  • Transmission Model: F/R fast & slow 3.5MPH
  • Transmission Type: Hydrostatic
  • Single Axle/Dual Axle: Dual Tracks
  • Tire Size/Type: 10"W rubber
  • Tire Condition: Fair
  • Drivetrain: 2WD
  • Does the unit operate?: Yes
  • Does the vehicle start?: Yes
  • Are keys available?: Yes
  • Ownership Documents: Bill of Sale Only
  • Mechanical Condition: Good
  • Mechanical Notes: Fleet maintained.
  • Body Condition: Fair
  • Body Notes: Solid with average rust and wear, view images.
  • Interior Condition: N/A
  • Misc Info: No attachments are included in this lot. It has auxiliary circuits for attachments and front hydraulic ports, lift-arm support.
  • GVWR: Operating weight 2,610Lbs
Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Set of 16"W Camoplast SD Series Rubber Tracks

Came off a Kubota SVL-75 compact track loader

Size: SD 400 x 86 x 52 BBE, Camso SD Pattern

Seller has heavy equipment on site and will assist buyers with loading their appropriate vehicle

In fair used condition.

Sold AS IS

Good Luck Bidding

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

(4) Toro Dingo Adaptor Plates

Coupler/Adapter mounts to convert an SCL-1000 Kubota to a Toro Dingo

1 1/2" diameter pin hole with 23"L x 9"W bases

Designed to adapt a SCL to a Toro Dingo

Seller has heavy equipment on site and will assist buyers with loading their appropriate vehicle

In like new condition

Sold AS IS

Good Luck Bidding 

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

2016 SkyJack #920601 72" Side Tilt Carriage Forks

Hydraulic with 10,0000Lbs capacity at 24" load center

5'L x 6"W forks, used for telehandlers

Seller has heavy equipment on site and will assist buyers with loading their appropriate vehicle

In very good to like new condition

Sold AS IS

Good Luck Bidding

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Kohler Truck Mount 13kW Gas Truck Generator

Model #13EGR

1 & 3 PH, 120/240v, 13kW 

GM Vortec 1.60L, 24.5HP, 4-cylinder gas engine with a digital control box

It has no fuel tank, previously operated off the trucks fuel line

Did not have a 12v battery with it so the true hours are unknown

Was removed from a service vehicle

Seller has heavy equipment on site and will assist buyers with loading their appropriate vehicle

It is in very good condition, the seller powered it up and it worked great.

Sold AS IS

Good Luck Bidding

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

2005 Saulsbury 9' Aluminum Fire Body

Carefully removed from an emergency vehicle, which was removed from service

Currently stored outdoors on staging timber

It has multiple storage compartments, amber & red emergency lighting, hose reel, etc

The body is all aluminum and has heavy gage side and step panels in a tread pattern style. 

The seller has heavy equipment on site and can assist the buyer with loading their appropriate vehicle

Seller has heavy equipment on site and will assist buyers with loading their appropriate vehicle 

Solid and in very good used condition.

Sold AS IS

Good Luck Bidding

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

(8) Pc Kenco HD Hydraulic Attachment Set

(1) #200-5 hydraulic quick coupler

(1) #36-48' hydraulic thumb

(3) mounts, set ears and related

(1) #MTD 36" ripper/stick

(1) 60" twist/bucket 1 1/8 yard type

(1) 48" 6 tooth XSB, 1-3/8 yard type bucket with side cutters

(1) 36" 5tooth XSB, 1 yard bucket

View the invoice images for a better description of the attachments 

This group was purchased new in 1/25/2019 for a Hitachi #ZX245 excavator (Cost $49,000)

The seller has heavy equipment on site and can assist the buyer with loading their appropriate vehicle

Seller has heavy equipment on site and will assist buyers with loading their appropriate vehicle 

All in good/very good to like new condition.

Sold AS IS

Good Luck Bidding

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Kubota #S6613 6' 8-Tooth Skid Steer Loader Bucket

Was used on a SVL-75 skid steer

Seller has heavy equipment on site and will assist buyers with loading their appropriate vehicle

In fair to good used condition.

Sold AS IS

Good Luck Bidding

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

2018 Doyl Vibro #100E Remote Control Post/Pile Driver

Currently set up for an excavator mount and can be changed to a skid steer mount 

Hydraulic with a wired in-cab controller which is not in the photos

Drive pressure 0-204 bar 3000PSI, clamp pressure 6000kg, variable speed 2000-3000rpm

Weight 1500Lbs, height 55.9", drive force 17 tons

The document tab has a brochure of a similar unit for review

Seller has heavy equipment on site and will assist buyers with loading their appropriate vehicle

In like new condition.

Sold AS IS

Good Luck Bidding

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.


Please wait...