Mass OSD DCR, Nantasket #12211 **7% BP**

All items closed
Page 1 of 1    
Grid with imagesList view
Page 1 of 1    
Grid with imagesList view
You can enter a new proxy bid at any time by entering a bid greater than your current high bid.
A proxy bid would make it more difficult for others to outbid you.

A proxy bid is the highest amount you are willing to pay for an auction item.

In response to other bids, the auction system will automatically increase your bid in the smallest increment possible (up to your proxy bid amount) in order to maintain your lead position.

To get a proxy bid you simply enter the maximum amount you are willing to pay into the bid form just as you would any other bid. If your bid is more than one bidding increment above the current high bid you will get a proxy bid unless another bidder has a proxy bid in place that is higher than the amount you enter.

At the end of the auction, the winning bidder pays only the lowest winning bid possible. That means that you can win an auction item at a price less than your proxy bid amount.

Your proxy bid amount is kept confidential from other bidders.

You can lower or delete a proxy bid by entering a lower amount.

Note: After watching hundreds of auctions and talking to thousands of bidders, we think using proxy bids in your bidding strategy works best for most people. It eliminates some of the pressure and reduces the risk of "sniping", where other bidders slip in slightly higher bids in the last seconds of bidding.

You now have a proxy bid.

You can raise or lower your proxy bid at any time by entering a new amount.

If you wish to remove your proxy bid you can do so by entering an amount equal to the current bid into the bid form.

You have a proxy bid of %s on this item. That means that the system will place bids for you in response to bids from other bidders, up to %s.

You can adjust this proxy bid by using the form above.

If you want to remove your proxy bid click here.
You can add a proxy bid to protect your item against other bidders by using the form above.
Place a bid using the form above.

You can enter the minimum bid of %s or a greater amount.

If you bid more than the minimum bid you will get a proxy bid that the system will use to bid for you against other bidders, up to the amount you enter. So if you enter a bid of more than %s for this item, the system will place bids on your behalf in response to bids from other users until someone bids more than your high bid.
LowHighIncrement
$0.00$8.99$0.10
$9.00$39.99$1.00
$40.00$99.99$2.50
$100.00$199.99$5.00
$200.00$999.99$10.00
$1,000.00$2,499.99$25.00
$2,500.00$4,999.99$50.00
$5,000.00$1,000,000,000.00$100.00
LowHighIncrement
$0.00$100,000,000.00$1.00
Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

MadVac 

Model 101G

S/N 1524

Onan Gas engine with 147 hours on meter.

Has key and extra bags.

Tires may be flat.

In a garage on street level.

Was backed in under its own power but has not been started in 3 years. 

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

MA License: Richard J. Klisiewicz III - AU3218

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Miller roughneck 2e Welder

S/N HF830668

Has pull cord and the engine is free.

Has cables and was in working order.  Has sat for some time.

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

MA License: Richard J. Klisiewicz III - AU3218

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Hotsy Steam Cleaner

Model 925A

S/N H43533 - 0499

Tires are all flat but unit is sitting on dolly included in sale.

Has hose along with high pressure hose and wand.  Did not check for tips.

Was in working condition when it was replaced.

Has Honda 9HP gas engine and is rated at 3000 PSI

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

MA License: Richard J. Klisiewicz III - AU3218

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Sarlo Walk Behind Mower

Model #1026 - 3SPSW

S/N #227728

With Briggs & Stratton 12.5HP gas engine

It is a self propelled 26" mower

Was working when removed from service.  Has sat for 4 years.

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

MA License: Richard J. Klisiewicz III - AU3218

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Lincoln Ideal Arc 250 Welder

S/N 5826-C

280/460 volts 50-25 AMPS

Unknown working condition.

Has not been used in some time.

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

MA License: Richard J. Klisiewicz III - AU3218

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

John Deere F935 Mower

S/N #M0F935X476671

Was backed into garage 8 years ago.

Tires flat.  The ceiling in the cab is falling off.

Front mow deck wheel missing.

Unknown operating condition.

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

MA License: Richard J. Klisiewicz III - AU3218

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

(4) Sarlo 26" Walk Behind Mowers

All are self-propelled.

All have Briggs & Stratton 8.5HP gas engines.

Garage was infested with pigeons.  Units were running when stored in garage. 

Garage has been repaired so birds are no longer present, however debris remains.

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

MA License: Richard J. Klisiewicz III - AU3218

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

John Deere EZ Trak Z425B Zero Turn Mower

S/N M0Z425B017927

304 hours on meter

Would not start.  Was said to have carburetor issues.

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

MA License: Richard J. Klisiewicz III - AU3218

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Billy Goat BT70A Vac

S/N 69484

With 8HP Briggs & Stratton gas engine.

Was running when stored over 3 years ago.

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

MA License: Richard J. Klisiewicz III - AU3218

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Power America Steam Cleaner

Model #1332

S/N #47034

Has 378 hours on meter.

Was working when removed from service.

Powered by an electric motor.

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

MA License: Richard J. Klisiewicz III - AU3218

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Honda 20HP Power broom.

For parts only

Model #HRG 7020ZMA

S/N #CRH3 - 1000376

Parts are what you see in photos.

On pallet.

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

MA License: Richard J. Klisiewicz III - AU3218


Please wait...