Machine Shop Estate Liquidation #8834

Bidding Now! - ends Wed, Oct 5 at 06:00:00 pm
Page 1 of 2    
Previous Page|Next Page
Grid with imagesList view
Page 1 of 2    
Previous Page|Next Page
Grid with imagesList view
You can enter a new proxy bid at any time by entering a bid greater than your current high bid.
A proxy bid would make it more difficult for others to outbid you.

A proxy bid is the highest amount you are willing to pay for an auction item.

In response to other bids, the auction system will automatically increase your bid in the smallest increment possible (up to your proxy bid amount) in order to maintain your lead position.

To get a proxy bid you simply enter the maximum amount you are willing to pay into the bid form just as you would any other bid. If your bid is more than one bidding increment above the current high bid you will get a proxy bid unless another bidder has a proxy bid in place that is higher than the amount you enter.

At the end of the auction, the winning bidder pays only the lowest winning bid possible. That means that you can win an auction item at a price less than your proxy bid amount.

Your proxy bid amount is kept confidential from other bidders.

You can lower or delete a proxy bid by entering a lower amount.

Note: After watching hundreds of auctions and talking to thousands of bidders, we think using proxy bids in your bidding strategy works best for most people. It eliminates some of the pressure and reduces the risk of "sniping", where other bidders slip in slightly higher bids in the last seconds of bidding.

You now have a proxy bid.

You can raise or lower your proxy bid at any time by entering a new amount.

If you wish to remove your proxy bid you can do so by entering an amount equal to the current bid into the bid form.

You have a proxy bid of %s on this item. That means that the system will place bids for you in response to bids from other bidders, up to %s.

You can adjust this proxy bid by using the form above.

If you want to remove your proxy bid click here.
You can add a proxy bid to protect your item against other bidders by using the form above.
Place a bid using the form above.

You can enter the minimum bid of %s or a greater amount.

If you bid more than the minimum bid you will get a proxy bid that the system will use to bid for you against other bidders, up to the amount you enter. So if you enter a bid of more than %s for this item, the system will place bids on your behalf in response to bids from other users until someone bids more than your high bid.
LowHighIncrement
$0.00$8.99$0.10
$9.00$39.99$1.00
$40.00$99.99$2.50
$100.00$199.99$5.00
$200.00$999.99$10.00
$1,000.00$2,499.99$25.00
$2,500.00$4,999.99$50.00
$5,000.00$1,000,000,000.00$100.00
LowHighIncrement
$0.00$100,000,000.00$1.00
Extended Bidding: i
Item Location: 9755 County Rd. , Clarence Center, Erie, NY 14032
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Loading assistance available by appointment & availability as needed

Hardinge Conquest Gang-Tool (GT) lathe

serial # GT-136.  

This machine is in good working condition and was used daily through the end of May, 2016.  

Comes with chip removal unit and total of 3 tool mounting top plates.

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer's request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller's premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Item Location: 9755 County Rd. , Clarence Center, Erie, NY 14032
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Loading assistance available by appointment & availability as needed

Hardinge CHNC II +Super Precision Lathe

Serial # CN-4536-F.  Fanuc controls, 1 5/8" spindle.

This machine is in good working order and was used almost daily through the end of May, 2016

 

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer's request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller's premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Item Location: 9755 County Rd. , Clarence Center, Erie, NY 14032
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Loading assistance available by appointment & availability as needed

Hardinge CHNC II +Super Precision Lathe.  

Serial # CN-1886-A2-16.  

General Numeric controls. 1 5/8" spindle.

 This machine experiences an overflow error message upon startup.  

We suspect a new Program Control Board is needed, however the PCB in it may be fixable.  

Good parts machine.  Last used in April, 2016.

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer's request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller's premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Item Location: 9755 County Rd. , Clarence Center, Erie, NY 14032
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Loading assistance available by appointment & availability as needed

Hardinge CHNC II +Super Precision Lathe.  

Serial # CN-2420-F.  

General Numeric controls.  

1 5/8" spindle.

This machine experiences an overflow error message upon startup.  

We suspect a new Program Control Board is needed, however the PCB in it may be fixable.  Good parts machine.  

Last used in May, 2016. includes some type of exhaust fan mounted on top.

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer's request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller's premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Item Location: 9755 County Rd. , Clarence Center, Erie, NY 14032
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Loading assistance available by appointment & availability as needed

Hardinge Horizontal lathe DV-59 second operation machine.  

This machine is good running and was used a few weeks monthly up to shop closing date.  

460 volts.

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer's request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller's premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Item Location: 9755 County Rd. , Clarence Center, Erie, NY 14032
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Loading assistance available by appointment & availability as needed

Hardinge horizontal lathe DSM-59 second operation machine with coolant pump.  

This machine was used as needed until shop closing date.

The coolant system has not been used for years.

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer's request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller's premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Item Location: 9755 County Rd. , Clarence Center, Erie, NY 14032
Click to view Item Photo Gallery

Item Description:

Loading assistance available by appointment & availability as needed

Hardinge Automatic Hand Chucker (AHC)

 serial number AHC-1511.  

Reliable machine, the hydralic cylinder needs to be resealed.  

Last used end of May, 2016

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer's request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller's premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Item Location: 9755 County Rd. , Clarence Center, Erie, NY 14032
Click to view Item Photo Gallery

Item Description:

Loading assistance available by appointment & availability as needed

Hardinge DSM-A

Serial number DSMA-5C-1207  

Good running machine, holds tolerance well.  

Last used May, 2016

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer's request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller's premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Item Location: 9755 County Rd. , Clarence Center, Erie, NY 14032
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Loading assistance available by appointment & availability as needed

Hardinge DSM-A

Serial number DSMA-5C-1367

Good running machine, last used May, 2016,

Holds tolerqnces pretty well.

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer's request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller's premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Item Location: 9755 County Rd. , Clarence Center, Erie, NY 14032
Click to view Item Photo Gallery

Item Description:

Loading assistance available by appointment & availability as needed

Hardinge Automatic Hand Chucker (AHC) parts

 (6) feed valve manifolds:

(2) complete

(4) missing couple of solenoid valves;

(1) vari-grip spindle;

(4) six station top plates;

Collet closer; couple dozen relays;

Assorted valves;

Programmer index drum segment;

Control panels,

(2) each right and left with most components intact;

centering bars;

other things as pictured.

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer's request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller's premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Item Location: 9755 County Rd. , Clarence Center, Erie, NY 14032
Click to view Item Photo Gallery

Item Description:

LNS Hydrobar Barfeed

Swiss made

15 feet long for up to 12 foot stock

serial 32709

sliding / swinging,

last used May, 2016

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer's request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller's premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Item Location: 9755 County Rd. , Clarence Center, Erie, NY 14032
Click to view Item Photo Gallery

Item Description:

LNS Hydrobar Barfeed

Swiss made,

15 feet long for up to 12 foot stock,

swinging style,  

plate ID removed, not used for a few years.

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer's request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller's premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Item Location: 9755 County Rd. , Clarence Center, Erie, NY 14032
Click to view Item Photo Gallery

Item Description:

LNS Hydrobar Barfeed

Swiss made,

11 feet  long for up to 8 foot stock,

sliding / swinging,  

plate ID removed

last used May, 2016

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer's request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller's premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Item Location: 9755 County Rd. , Clarence Center, Erie, NY 14032
Click to view Item Photo Gallery

Item Description:

SAMECA Barfeed

Swiss made SWM Omnibar 42-FS

model M04 o 440,

up to 12 foot stock,

swing loading,

5 cylinders included. 

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer's request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller's premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Item Location: 9755 County Rd. , Clarence Center, Erie, NY 14032
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Set up & Inspection Equipment Bausch & Lomb 10x microscope,

Nikon microscope model SMZ-2B, (2) Dolan Jenner Fibre-Lite units series 180,

(18) various dial indicators, Brown  Sharpe Hite-icator,

(2) caliper extenders,

Starrett #454 vernier height guage, Inspection plates: (1) steel, (1) granite, anvil micrometer, outside micrometer, calipers, assorted pic guages,

Brown & Sharpe #599 cylindrical square,

Taft-Pierce model 9116 sine bar,

Angle plate, 1-2-3 blocks,

Renshaw HPA.

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer's request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller's premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Item Location: 9755 County Rd. , Clarence Center, Erie, NY 14032
Click to view Item Photo Gallery

Item Description:

Relays and coils: Lot of 30 Allen Bradley 84AB86 coils with attached relays.

Used, from working environments.

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer's request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller's premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Item Location: 9755 County Rd. , Clarence Center, Erie, NY 14032
Click to view Item Photo Gallery

Item Description:

Electric motors all removed from a working machine: Wagner 7.5 HP 208/220/440v, 3phase model 254-11514-06; A.O. Smith 1/2 hp single phase (starter motor for the Wagner), (2) Westinghouse 230/440v 3 phase 60 hz, (1) Westinghouse 220/440v 3 phaericeral Nuse 60hz, (1) Reuland with pump 220/440v 3 phase 60 hz, (1) Reuland with pump 208-220/440v 3 phase 60/50hz, (1) General Numeric model 6 200v 3 phase, (1) General Electric 230/460v 3 phase 60 hz, (1) Delco safety switch 1/3 hp 115v

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer's request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller's premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Item Location: 9755 County Rd. , Clarence Center, Erie, NY 14032
Click to view Item Photo Gallery

Item Description:

Loading assistance available by appointment & availability as needed

Electric Transformer by Settu Electric: 50kva, 440/220, 50/60 Hz, 3 phase series S-3963

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer's request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller's premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Item Location: 9755 County Rd. , Clarence Center, Erie, NY 14032
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Loading assistance available by appointment & availability as needed

Electric Transformer by Federal Pacific: 45 kva, 240/208y/120, 60Hz, 3 phase series 4192 

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer's request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller's premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Item Location: 9755 County Rd. , Clarence Center, Erie, NY 14032
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Loading assistance available by appointment & availability as needed

Electric Transformer by Controlled Magnetics 20 kva, 50/60 Hz, 3 phase model 2688

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer's request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller's premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Item Location: 9755 County Rd. , Clarence Center, Erie, NY 14032
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Loading assistance available by appointment & availability as needed

Boyer-Shultz surface grinder

model 612

serial # 5115

last used May, 2016

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer's request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller's premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Item Location: 9755 County Rd. , Clarence Center, Erie, NY 14032
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Loading assistance available by appointment & availability as needed

Baldor Grinder

model # 502,

serial # 866

last used May, 2016

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer's request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller's premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Item Location: 9755 County Rd. , Clarence Center, Erie, NY 14032
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Raw Material bars, assorted lengths from 12 feet to 1 foot. Following is description-size-# usable feet
Aluminum 2024: flat-.5x.375-12, hex-.437-7,hex-.500-11.5, round-.250-132,rround-.375-12,round-.562-6,round-1.00-10, Aluminum 6061: flat-.500x.132-57,flat1.00x.750-2.5,round-.187-97, round-.625-77,round-.750-2.5,round-1.00-1.5,round-1.250-4.5, round-1.438-24, square, .625-9, tube-.25x.16-36 Brass: flat-.250x.062-48, flat-.500x.129-21.5, flat-1.00x.250-4.5, hex-.185-9, hex-.375-2, hex-.500-12, hex-.625-5, hex-.875-7.5, round-.140-213, round-.156-378, round-.187-115, .218-148, round.234-390, round-.250-5, round-.375-14, round-.625-36, .675-2, .round-.750-14, round-.812-12, square-.375-12, tube-.187x.115-180, tube-.375x.265-73.5, tube-.437x.300-17.5, tube-.556x.480-24, tube-.625x.500-6 Steel, 4140: round-.3125-45, round-.995-48, Steel 12L14: hex-.250-166.5, hex-.312-4.5, hex-.437-52.5, hex-.468-18, hex-.500-7, hex-.625-24, round-.137-2, round-.187-98, round-.216-12.5, round-.218-55.5, round-.250-9.5, round-.256-9, round-.265-17.5, round-.312-79.5, round-.328-3, .344-36, round-.375-2, round-.437-12, round-.453-24, round-.468-9.5, round-1.00-8.5, round-1.250-8.5; Stainless 303: round-.234-24, round-.313-13, round-.437-10, round-.500-13.5, round-.625, .5, 304: round-.250-15.5, round-.437-30.5, Stainless unknown: round-.118-49, round-.125-58, round-.156-52.5, round-.218-215, round-.531-12

Pallet Rack not included.

 

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer's request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller's premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Item Location: 9755 County Rd. , Clarence Center, Erie, NY 14032
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Hex Wrenches / Hex Keys: assorted, SAE & metric, T-handle & traditional, ball-end & straight. Est. 300 - 400 pieces.

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer's request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller's premises after this removal deadline will revert back to possession of the seller, with no refund.


Please wait...