Business Industrial Surplus #13572

All items closed
Page 1 of 2    
Previous Page|Next Page
Grid with imagesList view
Page 1 of 2    
Previous Page|Next Page
Grid with imagesList view
You can enter a new max bid at any time by entering a bid greater than your current high bid.
A max bid would make it more difficult for others to outbid you.

A max bid is the highest amount you are willing to pay for an auction item.

In response to other bids, the auction system will automatically increase your bid in the smallest increment possible (up to your max bid amount) in order to maintain your lead position.

To get a max bid you simply enter the maximum amount you are willing to pay into the bid form just as you would any other bid. If your bid is more than one bidding increment above the current high bid you will get a max bid unless another bidder has a max bid in place that is higher than the amount you enter.

At the end of the auction, the winning bidder pays only the lowest winning bid possible. That means that you can win an auction item at a price less than your max bid amount.

Your max bid amount is kept confidential from other bidders.

You can lower or delete a max bid by entering a lower amount.

Note: After watching hundreds of auctions and talking to thousands of bidders, we think using max bids in your bidding strategy works best for most people. It eliminates some of the pressure and reduces the risk of "sniping", where other bidders slip in slightly higher bids in the last seconds of bidding.

You now have a max bid.

You can raise or lower your max bid at any time by entering a new amount.

If you wish to remove your max bid you can do so by entering an amount equal to the current bid into the bid form.

You have a max bid of %s on this item. That means that the system will place bids for you in response to bids from other bidders, up to %s.

You can adjust this max bid by using the form above.

If you want to remove your max bid click here.
You can add a max bid to protect your item against other bidders by using the form above.
Place a bid using the form above.

You can enter the minimum bid of %s or a greater amount.

If you bid more than the minimum bid you will get a max bid that the system will use to bid for you against other bidders, up to the amount you enter. So if you enter a bid of %s for this item, the system will place bids on your behalf in response to bids from other users until someone bids more than %s.
LowHighIncrement
$0.00$8.99$0.10
$9.00$39.99$1.00
$40.00$99.99$2.50
$100.00$199.99$5.00
$200.00$999.99$10.00
$1,000.00$2,499.99$25.00
$2,500.00$4,999.99$50.00
$5,000.00$1,000,000,000.00$100.00
LowHighIncrement
$0.00$100,000,000.00$1.00
Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Up For Bid is this Early 1980's Cat D6D Bulldozer

This bulldozer is in good operational condition, may need updated batteries

The undercarriage is in good shape and has 80% or better useful life remaining (the pins have never been turned)

The hour meter reads 7537 but were not sure if it is operational

The body is solid with less than average rust

Sold AS IS

***Note we advise when bidding on motorized equipment or vehicles you inspect the equipment prior to bidding

Good Luck Bidding

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

  • Make: Caterpillar
  • Model: D6D
  • Body Style: Bulldozer
  • Hours: 7,537 on meter?
  • Engine Make/Model: Cat 3306 10.5L Turbo Charged?
  • Cyl: 6
  • Fuel Type: Diesel
  • Transmission Model: Power Shift 3F/3R
  • Transmission Type: Manual
  • Single Axle/Dual Axle: Single Axle
  • Tire Size/Type: 22
  • Tire Condition: Good
  • 2WD/4WD: 2WD
  • Does the unit operate?: Yes
  • Does the vehicle start?: Yes
  • Are keys available?: Yes
  • Ownership Documents: Bill of Sale Only. Cannot be registered for road use.
  • Mechanical Condition: Good
  • Mechanical Notes: Starts runs and drives and is fully operational, undercarriage 80%+ remaining life.
  • Body Condition: Good
  • Body Notes: Solid, view images.
  • Interior Condition: Fair
  • Titled: No
Extended Bidding: i
Click to view Item Videos Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Up for bid is this 2016 Kubota F3990 Diesel Front Mower Tractor

They purchased this new in 2016 and paid $25,000

This unit has only 89 hours on it and is hardly broken in

The front is mounted with a Pro 72" Commercial Cutting Deck, and they are including an older PTO powered Snow Blower attachment as shown in the photos

The video tab has a demonstration/review of a similar unit in action

The last images will provide more detailed information on this unit

The following general statements contain information on this series Kubota but there maybe variances from the subject unit

F Series 39.0 HP

Whatever your mowing application, there’s a Kubota F-Series mower that can do the job with power, precision, and efficiency. The line of three revamped models includes the F3990 with the highest-ever horsepower among all Kubota front-mount mowers. And all offer powerful yet more economical and cleaner performance, greater safety, easier maintenance, superior operator comfort as well as a higher level of productivity and reliability making them the right choice to meet all your mowing needs.

F3990
The new standard in professional front-mount mowers: Kubota’s flagship F3990 features a liquid-cooled, 39HP Kubota diesel engine with an electronic governor that stabilizes engine speed at 2,500rpm with the PTO switched on for enhanced cutting and discharge performance. Add the optional 100” Flex Mower Deck attachment for even more precision-cut

Pro-Commercial 72" mower deck
The Pro-Commercial mower
deck comes with an inner
baffle to prevent cut grass
from discharging to the
front. A larger discharge
chute improves discharge
performance. Also need less
power to run mower.

6.0" deep mower deck
Tall grass is no problem for this side-discharge professional mower
deck. Its 6.0"-deep deck design lets tall grass stand up so that it
can be cut more efficiently. This results in a faster cut and a cleaner
appearance.

Multi-V-Belt and Steel Pulleys

In addition to providing greater wear resistance, the heavy-duty cast-iron pulleys and a multi-V-belt drive system effectively distribute and reduce tension while transmitting power to the mower blades. The multi-V-belt won’t twist or slip, thus reducing the chance of damage to the mower. You get more performance and power – and fewer problems.

Fabricated Deck with Sturdy Steel Construction  
Stronger and more durable than conventional pressed steel decks, the F-Series’ fabricated steel decks are designed to provide years of reliable cutting performance with minimal maintenance.

90-degree Tilt Mower Deck

The mower deck lifts a full 90 degrees, providing unobstructed access to the blades and deck underside for easier cleaning and maintenance.

Kubota diesel engines
Powerful Kubota diesel engines mean
faster, more efficient job performance.
These F-Series engines have power to
spare. Their high torque rise ensures faster,
smoother recovery under sudden loading,
letting you power through tall or wet grass
without skipping a beat. They're also
environmentally and economically friendly
thanks to their compliance with the EPA's
Tier IV emissions regulations,
enhanced combustion efficiency,
low vibration and noise levels,
and reduced fuel costs.

F3990 39HP/2500RPM
Clean emission diesel engine
The F-Series diesel engines are built for greater power with
cleaner emissions. The F3990’s liquid-cooled E-TVCS (vortex
combustion system) engine delivers increased power and high
torque for all the tractor strength you need while lowering
emissions. Its combination with the Diesel Particulate Filter (DPF)
Muffler further reduces emissions to make it compliant with the
TierIV Emissions regulations.

Electronic governor
The F3990 diesel engine features an electronic governor that
stabilizes the engine speed at 2,500rpm with the PTO switched on
for enhanced cutting and discharge performance, and increases
engine speed to 2,700rpm with the PTO switched off for faster
traveling speed.

A powerful hydrostatic transmission
provides quick response, excellent
working speed, and more muscle
for tough mowing jobs. The single
pedal design lets you easily
change the direction as well as
control the speed (4WD: 12.5 mph
max. forward speed, 6.8 mph in
reverse), keeping your hands free
for steering and implement control
for increased productivity.

High Lift Capacity

A high lifting capacity gives the F-Series the versatility to handle an array of implements, including a grass catcher, snow blower, rotary sweeper, debris blower and the 100” flex mower.

PTO Shaft Drive

Shaft drive means no belts or pulleys – just smooth and direct power transfer from the engine to the deck and other PTO-driven attachments. Shaft drive also requires less maintenance and provides greater dependability.

Comfort
Long hours on the job can
take a toll on operator
efficiency. That’s why all
Kubota F-Series mowers are
equipped with a large
operator’s platform and a
variety of features to keep
you comfortable and
productive under all working
conditions. You’ll notice the
difference after a long day
behind the wheel.

Sold AS IS

***Note we advise when bidding on motorized equipment or vehicles you inspect the equipment prior to bidding

Good Luck Bidding

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

  • Year: 2016
  • Make: Kubota
  • Model: F3990
  • Body Style: Front Mower Tractor
  • VIN/SN: 20780
  • Hours: 89
  • Engine Make/Model: Kubota V1505T-IDI+DPF Liquid Cooled 39HP
  • Cyl: 4
  • Fuel Type: Diesel
  • Transmission Model: HST F2/R2
  • Transmission Type: Hydrostatic
  • Single Axle/Dual Axle: Single Axle
  • Tire Size/Type: Front 18 X 9.50-8, Rear 24 X 12.00-12
  • Tire Condition: Good
  • 2WD/4WD: 4WD
  • Does the unit operate?: Yes
  • Does the vehicle start?: Yes
  • Are keys available?: Yes
  • Ownership Documents: Bill of Sale Only. Cannot be registered for road use.
  • Mechanical Condition: Good
  • Mechanical Notes: Purchased new in 2016, excellent condition.
  • Body Condition: Good
  • Body Notes: View images.
  • Interior Condition: Good
  • Misc Info: 4 Wheel Drive Assist, PTO Powered Snow Blower Attachment & 72
  • Titled: No
Extended Bidding: i
Click to view Item Videos Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Up For Bid is this New Fisher Speed-Caster 900 Tailgate Spreader

This pricey spreader is new inventory with a retail price of $3,959.00

There is a video available through the video tab which demonstrates a Speed-Caster 900

The buyer will have to purchase the specific mount for this system

The following information are general statements regarding a speed-caster 900 and may contain information that varies from the subject unit

"THE TRIPLE THREAT" SPEED-CASTER 900 Speed. Control. Versatility.

Speed-Caster 900 Specs
Capacity 9.00 cu ft
Hopper Construction Polyethylene 
Dimensions Overall (LxWxH)  24" x 52" x 36"
Approx. Weight (empty)  180 lb
Motor Dual Electric, 12V 1/3 hp
Spinner Size 12"
Spreading Width Up to 40' 
Materials Bagged Rock Salt, Dry Free-Flowing Sand, 50/50 Salt/Sand Mix
Vehicle Application  Tractors, 1-Ton or Smaller Pickups
Available Mounts  Pivot Mount, 2" Receiver Mount (requires adapter mount), 3-point Hitch Mount*

Conquer it all with the FISHER® SPEED-CASTER™ 525 or SPEED-CASTER™ 900 tailgate spreaders. Featuring a 2-stage, auger-fed delivery system with independent control of material flow and spread pattern, these tailgate spreaders are designed to deliver the right de-icing material to the right place, and without sacrificing your precious cargo space.

Unique Features:

Cover:
A latching, molded poly lid protects material from the elements.

Dual Electric Motors:
The two high-torque 12-volt electric motors provide quiet, reliable, independent control over the auger and spinner mechanisms. The spinner motor is sealed inside a weather-resistant housing, protecting it from corrosion.

Controls:
Enhanced, dual variable-speed control allows you to precisely match material delivery and spread patterns to conditions.

Three standard accessory buttons and a dedicated blast button provide optimum in-cab efficiency.
Easy-to-understand, digital self-diagnostics alert the operator when the spreader is empty or when adjustments are needed, and LEDs make the control easy to read.

Its compact size compared to traditional controls fits easily into today's modern truck cab designs.

Corrosion-Resistant Hopper:
SPEED-CASTER™ 525 and SPEED-CASTER™ 900 tailgate spreaders feature corrosion-free poly hoppers for long-lasting durability.

Material Delivery:
Material is delivered by a heavy-duty steel auger to provide long-lasting, reliable performance.

If an obstruction occurs, the transverse auger system will reduce downtime by automatically reversing until the obstruction is cleared and then normal operation will resume.

Spinner:
The SPEED-CASTER™ 525 tailgate spreader features a 10" spinner made of nylon/glass reinforced resin, and delivers a spread pattern of up to 30'.

The SPEED-CASTER™ 900 tailgate spreader features a 12" steel spinner (shown above) and delivers a spread pattern of up to 40'.

Accessory Integration:
Conveniently connect accessories directly into the spreader module mounted in the spinner motor enclosure. Accessories automatically integrate with the tailgate control without having to run additional wires from the front of the truck.

Inverted V / Vibrator:
An inverted V comes standard and helps keep sufficient material weight off of the auger, ensuring smooth startup and flow of material. It is directly connected to the vibrator to help reduce bridging and keep material moving to the auger.

Top Screen:
A steel top screen comes standard, which helps break up large chunks of de-icing material during the loading process to prevent clogging and bridging during spreader operation.

Mounting Options:
The SPEED-CASTER™ 525 tailgate spreader comes standard with a combination 2" receiver hitch and 3-point tractor mount for use on multiple vehicle types.

The SPEED-CASTER™ 900 tailgate spreader* requires the additional purchase of one of the available mount options: a pivot mount, a 2" receiver hitch mount (requires additional adapter), or a 3-point hitch mount.

*Mounts sold separately.

***Note we advise when bidding on motorized equipment or vehicles that you inspect the unit prior to bidding

Sold AS IS

Good Luck Bidding

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Up For Bid is this Westward #5M459 Air/Hydraulic Axel Service Jack

With Lifting Capacity of 22 or 35 tons (Retail $1,086.00)

This pricey jack is in like new condition (Display Unit)

The following general statements may contain variances from the subject unit

Technical Specs
Item Air/Hydraulic Axel Jack
 Application General
 Lifting Capacity 22 or 35 tons
 Lifting Height Min. 8-1/8"
 Lifting Height Max. 19-5/8"
 Power Raise 11-1/2"
 Chassis Length 21-5/8"
 Operation Type Air
 Handle Length 40-7/8"
 Standards ASME/ANSI-PALD

***Note we advise when bidding on motorized equipment or vehicles that you inspect the unit prior to bidding

Sold AS IS

Good Luck Bidding

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Up For Bid is this OTC Blade Buddy Plow Jack 5083

This unit is in like new condition (Display Unit) Retail $581.00

These general statements may contain variances from the subject unit

Plow Cutting Edge Jack, Blade Buddy, Hydraulic, 140 lb. Capacity, 19 in. Maximum Height, Steel

"Stop hurting your back--these OTC Blade Buddy plow jacks will make replacing the cutting edges of front, wing, or underbody plows much easier and faster. One person can bring heavy, odd-shaped cutting edges to the plows and raise them easily with the built-in hydraulic jack."

Jack Capacity: 4 ton 

Jack Mechanism: Hydraulic 

Maximum Lift Height (in): 19.000 in. 

Jack Material: Steel 

Jack Color: Blue

***Note we advise when bidding on motorized equipment or vehicles that you inspect the unit prior to bidding

Sold AS IS

Good Luck Bidding

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Up For Bid is this OTC #5076 Oil Transfer Tanker/Pump

#5076 Oil Transfer Tank 17 Gallons 5 gpm Pump  MSRP $730.00

This unit is in like new condition (Display Unit) includes pump

The following information may contain variances from the subject unit

Transfer Tanker handles drained oil without spilling a drop after draining the oil from a large displacement engine, getting it to your bulk storage container can be a messy hassle. But not with OTC's new Transfer Tanker in your shop. Collect used oil in the 17-gallon reservoir.
• Rolls smoothly on 5" diameter freewheeling casters.
• Pumps 5 gal./min. through an 8' transfer hose.
• Transfer Tanker can also be used for transferring used antifreeze.
• Floor space is 24" x 42", and 9-1/2" high

***Note we advise when bidding on motorized equipment or vehicles that you inspect the unit prior to bidding

Sold AS IS

Good Luck Bidding

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Up For Bid is this OTC #5017 Brake Drum Dolley

This is in like new condition (Demo Unit) MSRP $607.00

The following general statements may include some variances to the subject unit

Remove, install, and transport truck brake drums without physically having to lift them. Works on 15" and 16-1/2" drums found on most Class 7 and 8 tractor and trailer brake systems. Heavy-gauge steel construction, ten-inch pneumatic tires, and adjustable handle. Makes it a 1 person job

Technical Specs
 
Item Dolly
 Type Brake Drum
 Height (In.) 18
 Handle Length (In.) 37 to 55
 Class 7 and 8
 Used For Removing, Installing and Transporting 15 and 16 1/2" Truck Brake Drums
 Includes 10" Pneumatic Wheels and Telescoping, Adjustable Handle

***Note we advise when bidding on motorized equipment or vehicles that you inspect the unit prior to bidding

Sold AS IS

Good Luck Bidding

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Up For Bid is this Mohawk #TP-20 Two Post Vehicle Lifts 20,000 LB. Capacity

The lead images show this lift prior to being dismantled and moved to the auction location, additional photos show it in its dismantled condition

This unit was in good working condition when removed from service

The following general statements may contain variances to the subject unit

Mohawk’s TP-20 lift uses double telescoping three stage swing arms and slider combination, has a clear floor design and adjustable height overhead hydraulic lines for ultimate flexibility

◾Lifts vehicles up to 20,000 lbs.
◾Surface mounted design bolts to the shop floor.
◾No in-ground oil tanks, no digging for installations, making installations fast and service easy.
◾Low profile, 3 stage arms for access under compact cars through medium duty trucks.
◾ALI safety certified to meet national and local OSHA & ANSI codes (ANSI/ALI ALCTV-2006) for the safety of your shop’s employees.
◾Light thru medium duty vehicles, Mohawk’s TP-20 lifts them all.
◾Constructed of heavy 7” x 1” fork lift mast channels (NOT formed sheet metal)
◾Each of the carriages ride on double sealed, self lubricating ball bearing rollers (NOT plastic slide blocks) for a lifetime of maintenance free service.
◾Direct drive lifting rods attached to each cylinder and carriage (no cables, chains, or pulleys) means no parts to wear or maintain
◾WIDE 48” base for stability.

BENEFITS
◾3 section swing arms make positioning easier than a 2 stage arm and increases lifting range, for all wheelbases.
◾5”, 7 1/2” and 10” stacking truck adaptors included to reach truck frames and get around fuel tanks or tool boxes.
◾Built Mohawk TOUGH—the TP-20 is the virtually the same structural column and same carriage used in Mohawk’s TP-26 and TP-30!
◾Built to last forever.

SAFETIES
◾Single position mechanical lock release, located at the main post, unlocks both safeties.
◾Release the mechanical locks with Mohawk’s air cylinders. Upon release, safeties immediately re-engage.
◾20,000 lb. capacity to safely raise fully loaded work and utility trucks.
◾14 position 11/2” thick steel plate safety locks in each post start engaging at 5” and continue through the full lifting height.
◾Optional safety gauge verifies lift has been lowered onto locks.

***Note we advise when bidding on motorized equipment or vehicles that you inspect the unit prior to bidding

Sold AS IS

Good Luck Bidding

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Up For Bid is this 1000 Gallon Stationary Fuel Tank with Gasboy Pump and Card Reader System

This equipment is untested functional condition unknown

The pumps have been stored indoors and an outdoor storage tank has been included in this lot

(1) 1000 Gallon Fuel Tank (no leaks)

(1) Gasboy #9753EXTW1, CMFILSSA, Serial #500918 Fuel Pump (As IS)

(1) Gasboy #2000S CFN Fuel Management System, Data Entry Terminal, Card Reader (As Is)

Comes with pump and tank only

***Note we advise when bidding on motorized equipment or vehicles that you inspect the unit prior to bidding

Sold AS IS

Good Luck Bidding

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Up For Bid is this 1975 Fruehauf 40' Tandem Axle Trailer Chassis

This trailer has been parked for sometime and the condition is unknown as to the original specifications

The frame is solid with average surface rust and some areas of spot rot

Please view images, it comes with bill of sale only

***Note we advise when bidding on motorized equipment or vehicles that you inspect the unit prior to bidding

Sold AS IS

Good Luck Bidding

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

  • Year: 1975
  • Make: Fruehauf
  • Model: 40'
  • Body Style: Tandem Axle Trailer Chassis
  • VIN/SN: 00389160V00W2486
  • Transmission Type: N/A
  • Single Axle/Dual Axle: Tandem Axle Dual Wheel
  • Tire Size/Type: 11R22.5
  • Tire Condition: Fair
  • 2WD/4WD: N/A
  • Does the unit operate?: Yes
  • Does the vehicle start?: N/A
  • Are keys available?: N/A
  • Ownership Documents: Bill of Sale Only. Cannot be registered for road use.
  • Mechanical Condition: Unknown
  • Mechanical Notes: Parked for sometime condition unknown as to original specifications.
  • Body Condition: Poor
  • Body Notes: Frame is solid with average surface rust, some areas of spot rot.
  • Interior Condition: N/A
  • Titled: No
  • GVWR: 54,800Lbs
Extended Bidding: i
Click to view Item Photo Gallery

Item Description:

Up For Bid is this partial reel of Fiber Optic Cable by Superior Essex

It is type #144-RWP LT SJSA D/F

Partial Reel, linear footage is undetermined

144 Fiber Count Loose Tube Single Jacket Single Armor Type (Outside Plant Environments)

***Note we advise when bidding on motorized equipment or vehicles that you inspect the unit prior to bidding

Sold AS IS

Good Luck Bidding

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Up For Bid is this Steel Fabricated Utility Body Cap Enclosure

It measures approximately 9'L x 76 1/2"W

It is steel constructed solid with spot surface rust, utility access doors are unattached and on top of unit as shown in the photos

***Note we advise when bidding on motorized equipment or vehicles that you inspect the unit prior to bidding

Sold AS IS

Good Luck Bidding

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Up For Bid is this Spanco Steel Gantry Crain with Yale 1000Lb Chain Fall

This stationary Gantry measures approximately 8'W x 10"T, I-Beam constructed with a model #F2000WOB and rated at 2000Lbs

This gantry has been outside for sometime and is solid but has surface rust throughout, the Yale chain fall functions and is rated at 1000Lbs

***Note we advise when bidding on motorized equipment or vehicles that you inspect the unit prior to bidding

Sold AS IS

Good Luck Bidding

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Up for Bid is this Military 600 Gallon Aluminum Stationary Fuel Tank

This tank does not leak and is in good working condition

Type is MIL-T-22238

Aluminum Constructed, convex shape with heavy welds with skid type supports

Jungle camo in color

***Note we advise when bidding on motorized equipment or vehicles that you inspect the unit prior to bidding

Sold AS IS

Good Luck Bidding

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Up for Bid is this Military 600 Gallon Aluminum Stationary Fuel Tank

This tank does not leak and is in good working condition

Type is MIL-T-22238

Aluminum Constructed, convex shape with heavy welds with skid type supports

Desert Sand in color

***Note we advise when bidding on motorized equipment or vehicles that you inspect the unit prior to bidding

Sold AS IS

Good Luck Bidding

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Up for Bid is this Stationary 500 Gallon Fuel Tank

This tank does not leak and includes a safety surround it is solid but has surface rust, was in working condition when removed from service

***Note we advise when bidding on motorized equipment or vehicles that you inspect the unit prior to bidding

Sold AS IS

Good Luck Bidding

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Up For Bid is this 1988 6,000Lbs Tilt Deck 16' Equipment Trailer

This trailer has been parked for sometime and was in operational condition when removed from service

Its unknown if this trailer is within its original specifications of 6,000Lbs or brake line condition

The frame looks solid with surface rust throughout, the wood planking needs repair, view images

The stand and staging timber sitting on the deck is not included

The deck is 16' x 74"  plus a 2' Beaver Tail

***Note we advise when bidding on motorized equipment or vehicles that you inspect the unit prior to bidding

Sold AS IS

Good Luck Bidding

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

  • Year: 1988
  • Make: DY/WE
  • Model: Tilt Deck
  • Body Style: Equipment Trailer
  • VIN/SN: CN586822043
  • Transmission Type: N/A
  • Single Axle/Dual Axle: Tandem Axle Single Wheel
  • Tire Size/Type: LT215/85R16
  • Tire Condition: Fair
  • 2WD/4WD: N/A
  • Does the unit operate?: Yes
  • Does the vehicle start?: N/A
  • Are keys available?: N/A
  • Ownership Documents: Bill of Sale Only. Cannot be registered for road use.
  • Mechanical Condition: Fair
  • Mechanical Notes: It has been parked for sometime, was in operational condition when removed from service.
  • Body Condition: Fair
  • Body Notes: Frame is solid surface rust throughout, decking needs repair.
  • Interior Condition: N/A
  • Titled: No
  • GVWR: 6,000Lbs
Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

**Only trailer is up for bid on this lot**

Up For Bid is this 1995 Kalyn Lowboy Equipment Trailer

This heavy duty trailer is in good condition, the body and frame are solid with average surface rust

This trailer is a model LB-3-35T, MFG 10-31-95

Approximate Dimensions: Deck 31 1/2' Long plus 10' Long Neck, with 6' Hydraulic Power Ramps (functional)

This is a tri-axle trailer with the tires in good condition and a full size spare  

The GVWR is 87,320Lbs

Sold AS IS

***Note we advise when bidding on motorized equipment or vehicles you inspect the equipment prior to bidding

Good Luck Bidding

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

  • Year: 1995
  • Make: Kalyn
  • Model: 35 Ton
  • Body Style: Lowboy Trailer
  • VIN/SN: 1K9E16340T1005285
  • Transmission Type: N/A
  • Single Axle/Dual Axle: Tri Axle Dual Wheel
  • Tire Size/Type: 215/75R17.5
  • Tire Condition: Good
  • 2WD/4WD: N/A
  • Does the unit operate?: Yes
  • Does the vehicle start?: N/A
  • Are keys available?: N/A
  • Ownership Documents: Clean Title
  • Mechanical Condition: Good
  • Body Condition: Good
  • Body Notes: Solid with average rust, view images.
  • Interior Condition: N/A
  • Titled: Yes
  • GVWR: 87,320Lbs
Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Up for Bid is this 1984 Dorsey 26' Semi Dump Trailer

This solid dump trailer is in good operational condition

The brakes and tires were updated not to long ago

The frame is solid with average surface rust, view images

***Note we advise when bidding on motorized equipment or vehicles that you inspect the unit prior to bidding

Sold AS IS

Good Luck Bidding

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

  • Year: 1984
  • Make: Dorsey
  • Model: 26'
  • Body Style: Aluminum Semi Dump Trailer
  • VIN/SN: 1DTD18A20EP016587
  • Transmission Type: N/A
  • Single Axle/Dual Axle: Tandem Axle Dual Wheel
  • Tire Size/Type: 12R22.5
  • Tire Condition: Good
  • 2WD/4WD: N/A
  • Does the unit operate?: Yes
  • Does the vehicle start?: N/A
  • Are keys available?: N/A
  • Ownership Documents: Clean Title
  • Mechanical Condition: Good
  • Mechanical Notes: Trailer is in good operational condition with updated brakes and tires.
  • Body Condition: Good
  • Body Notes: View Images
  • Interior Condition: N/A
  • Titled: Yes
Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Up For Bid is this 1984/85 International S2500 Series Flatbed Fuel Truck

This truck is being sold without a title and should be repurposed for parts or for use on private property, will need to be towed from this location

The vehicle is in poor to fair mechanical condition, there are no batteries, But is a running vehicle.

The front tires will be replaced with other tires

The frame is fairly solid with average rust and spot body rot

It has twin Military 600 gallon aluminum fuel/liquid storage tanks and uses a custom 3" Home-lite 8Hp pump system

The interior is poor, view images

***Note we advise when bidding on motorized equipment or vehicles that you inspect the unit prior to bidding

Sold AS IS

Good Luck Bidding

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

  • Year: *UPDATED* 1985
  • Make: International
  • Model: 2574
  • Body Style: Flatbed with Fuel Tanks
  • VIN/SN: 1HTZML6R9EHAEHA64
  • Miles: 129,745
  • Hours: 2,022
  • Engine Make/Model: Cummins Predecessor to the N14 Type
  • Cyl: 6
  • Fuel Type: Diesel
  • Transmission Model: Split Shifting
  • Transmission Type: Manual
  • Single Axle/Dual Axle: Dual Wheel
  • Tire Size/Type: 11R22.5
  • Tire Condition: Fair
  • 2WD/4WD: 2WD
  • Does the unit operate?: Yes
  • Does the vehicle start?: Yes
  • Are keys available?: Yes
  • Ownership Documents: Bill of Sale Only. Cannot be registered for road use.
  • Mechanical Condition: Poor
  • Mechanical Notes: No Batteries, Unit does run but is in rough shape.
  • Body Condition: Fair
  • Body Notes: Pretty solid, areas of surface rust and spot rot.
  • Interior Condition: Poor
  • Misc Info: 12'L x 8'W Steel Deck with twin 600 gallon military fuel tanks and pump.
  • Titled: No
Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

This lot is located at 1611 Foote Avenue Extension, Jamestown, NY 14701

Up For Bid is this GFS Galvanized Paint Spray Booth

This unit has been dismantled and was in working condition when removed from service, however it has been sitting outdoors for sometime

It is a panel type unit and is approximately 6-1/2'W and 84"T plus the fan

I am not sure if it is complete but the panel sections are sitting on top of the unit

It has an U & L tag and has 1 1Hp, 208/230/460V drive unit

***Note we advise when bidding on motorized equipment or vehicles that you inspect the unit prior to bidding

Sold AS IS

Good Luck Bidding

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

This lot is located at 1611 Foote Avenue Extension, Jamestown, NY 14701

 Up For Bid is this Kemppi PS3500 Inverter Multi Process Welder/FU20 Wire Feeder

This unit is in good operational condition and comes as configured

The following are some general statements may contain variances from the subject unit

•The multi system is particularly suitable for manual metal arc welding.The arc ignites without fail and burns steadily even when welding the most stubborn materials because of the high internal control speed,
•ignition current pulse and high idling voltage, the power source is also suitable for both dc tig and mig welding with the aid of a tu20 hf unit or a suitable wire feed unit

***Note we advise when bidding on motorized equipment or vehicles that you inspect the unit prior to bidding

Sold AS IS

Good Luck Bidding

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Videos Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Up For Bid is this OTC #1520 20-Ton Mobile Vehicle Lift System 

This Pricey lift system is in very good working condition and includes Twin 10-Ton Units (RETAIL $9,800.00)

There is a video through the video tab of a similar unit in a training session

A PDF Manual is available through the document tab 

The following are some general statements regarding this type of lift and may contain variances from the subject unit

The OTC 10-Ton Mobile Vehicle Lift System (2 Lifts) is ideal for handling class 7 and class 8 tractor lifting needs. There is no need to waste time to re-block and make additional lifts for the clearance required for under vehicle service. You can easily roll the system to the vehicle, anywhere in the shop or even outside on a level surface. It also doubles as support stands when the retention pin is inserted.

The OTC 10-Ton Mobile Vehicle Lift System (2 Lifts) has a unique design that provides the lift from the tires, instead of the usual frame or axle members. It works perfectly in situations that complicate lifting, such as limited ground clearance or no clear access at all. It has a single controller operating both sides, ensuring a smooth and level lift, up to 2 feet from the bottom of the tires to the ground.

Key Features of the OTC 10-Ton Mobile Vehicle Lift System (2 Lifts) - 1520:

Air operated to handle class 7 and 8 tractors
No re-blocking required
Provides lift from tires
Single controller
Doubles as support stands

Technical Specifications
Capacity: 10 tons
Air Pressure: 150 psi
Lifting Range: 0" to 24"
Saddle Width: 19-1/2" to 24"
Height: 53-1/4"
Width: 41-1/2"
Length: 39-1/2"

***Note we advise when bidding on motorized equipment or vehicles that you inspect the unit prior to bidding

Sold AS IS

Good Luck Bidding

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Up for Bid is this Matco Custom Mechanics Tool Box

Overall length 111", Height 92", Depth 28", in three sections with 58 lined drawers  
 
This "Large, Custom Built and Expensive" tool box is in very good used condition

With single bay side unit, 2) Stacked four bay units and open span top, Lined Drawers, 6) Heavy Duty Caster Wheels

TOOLS ARE NOT INCLUDED

***Note we advise when bidding on motorized equipment or vehicles that you inspect the unit prior to bidding

Sold AS IS

Good Luck Bidding

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.


Please wait...