City of Tonawanda DPW, NY #13259

All items closed
Page 1 of 1    
Grid with imagesList view
Page 1 of 1    
Grid with imagesList view
You can enter a new max bid at any time by entering a bid greater than your current high bid.
A max bid would make it more difficult for others to outbid you.

A max bid is the highest amount you are willing to pay for an auction item.

In response to other bids, the auction system will automatically increase your bid in the smallest increment possible (up to your max bid amount) in order to maintain your lead position.

To get a max bid you simply enter the maximum amount you are willing to pay into the bid form just as you would any other bid. If your bid is more than one bidding increment above the current high bid you will get a max bid unless another bidder has a max bid in place that is higher than the amount you enter.

At the end of the auction, the winning bidder pays only the lowest winning bid possible. That means that you can win an auction item at a price less than your max bid amount.

Your max bid amount is kept confidential from other bidders.

You can lower or delete a max bid by entering a lower amount.

Note: After watching hundreds of auctions and talking to thousands of bidders, we think using max bids in your bidding strategy works best for most people. It eliminates some of the pressure and reduces the risk of "sniping", where other bidders slip in slightly higher bids in the last seconds of bidding.

You now have a max bid.

You can raise or lower your max bid at any time by entering a new amount.

If you wish to remove your max bid you can do so by entering an amount equal to the current bid into the bid form.

You have a max bid of %s on this item. That means that the system will place bids for you in response to bids from other bidders, up to %s.

You can adjust this max bid by using the form above.

If you want to remove your max bid click here.
You can add a max bid to protect your item against other bidders by using the form above.
Place a bid using the form above.

You can enter the minimum bid of %s or a greater amount.

If you bid more than the minimum bid you will get a max bid that the system will use to bid for you against other bidders, up to the amount you enter. So if you enter a bid of %s for this item, the system will place bids on your behalf in response to bids from other users until someone bids more than %s.
LowHighIncrement
$0.00$8.99$0.10
$9.00$39.99$1.00
$40.00$99.99$2.50
$100.00$199.99$5.00
$200.00$999.99$10.00
$1,000.00$2,499.99$25.00
$2,500.00$4,999.99$50.00
$5,000.00$1,000,000,000.00$100.00
LowHighIncrement
$0.00$100,000,000.00$1.00
Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Up For Bid is this 1988 Ford L8000 Spreader Truck

This truck starts runs drives and is in fair operational condition including the spreader

The salter body is approximately 11' long with rear chain spinner and hydraulic built in conveyor

The frame has average rust and is solid, the cab is fair but the floor is thinning with some rot holes as shown in the photos, hood is fiberglass tilt type

The interior is rough with no passenger seat, driver side window crank is nonfunctional and locked in place

***Note we advise when bidding on motorized equipment or vehicles that you inspect the unit prior to bidding

Sold AS IS

Good Luck Bidding

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

  • Year: 1988
  • Make: Ford
  • Model: L8000
  • Body Style: Fiberglass Salt/Spreader Truck
  • VIN/SN: 1FDYK8OU4JVA50771
  • Miles: 119,000
  • Engine Make/Model: Cat 3208 215Hp
  • Cyl: 8
  • Fuel Type: Diesel
  • Transmission Model: Allison
  • Transmission Type: Auto
  • Single Axle/Dual Axle: Single Axle Dual Wheel
  • Tire Size/Type: 11R22.5
  • Tire Condition: Good
  • 2WD/4WD: 2WD
  • Does the unit operate?: Yes
  • Does the vehicle start?: Yes
  • Are keys available?: Yes
  • Ownership Documents: Clean Title
  • Mechanical Condition: Fair
  • Mechanical Notes: Starts runs drives, operational spreader .
  • Body Condition: Poor
  • Body Notes: Cab floor has small rot holes, frame is fair, fiberglass hood and spreader.
  • Interior Condition: Poor
  • GVWR: 35,100Lbs
  • Titled: Yes
Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Up For Bid is this 1999 Ford Econoline E150 XL Passenger Van

This van starts runs drives and is in fair operational condition was driven to the location

You can hear an exhaust manifold leak on the right side, possibly and EGR tube

This vehicle was primarily used to shuttle senior citizens back and forth from the recreation centers

The body has a rear passenger side scrape with dent, minor scratches, rust and average ware 

The interior is in fair condition, view images

***Note we advise when bidding on motorized equipment or vehicles that you inspect the unit prior to bidding

Sold AS IS

Good Luck Bidding

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

  • Year: 1999
  • Make: Ford
  • Model: Econoline E150 XL
  • Body Style: Passenger Van
  • VIN/SN: 1FMRE1122XHB21747
  • Miles: 32,368
  • Engine Make/Model: 4.2L
  • Cyl: 8
  • Fuel Type: Gasoline
  • Transmission Model: 4 Speed
  • Transmission Type: Auto
  • Single Axle/Dual Axle: Single Axle
  • Tire Size/Type: 235/75R15
  • Tire Condition: Fair
  • 2WD/4WD: 2WD
  • Does the unit operate?: Yes
  • Does the vehicle start?: Yes
  • Are keys available?: Yes
  • Ownership Documents: Clean Title
  • Mechanical Condition: Fair
  • Mechanical Notes: Starts run drives was driven to location, you can hear an exhaust manifold leak on right side, maybe EGR Tube.
  • Body Condition: Fair
  • Body Notes: Rear passenger side scrape and dent, average surface rust, view images.
  • Interior Condition: Good
  • GVWR: 7000 Lbs
  • Titled: Yes
Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Up For Bid is this used 11' Viking Steel Wing Plow Blade

This wing blade is in functional condition, solid with surface rust

It comes with springs and mounting components as shown in the photos

**Note we advise when bidding on motorized equipment or vehicles that you inspect the unit prior to bidding

Sold AS IS

Good Luck Bidding

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Up For Bid is this (10) piece group of Rubber Snowplow Cutting Edges Including:

(8) New Units that were intended for Tenco Plows, 11' 3"L x 10"W x 1 1/2" thick, with 8" spacers

(2) One side used only cutting edges, 11' L x 10"W x 1 1/2" thick with 8" spacers

Sold AS IS

Good Luck Bidding

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Up For Bid is this Never Installed 10' Steel Cutting Edge

It is 10'L x 8" W x 5/8" thick with 8" spacing

Sold AS IS

Good Luck Bidding

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Up For Bid is this (2) piece group of Rubber Snowplow Cutting Edges Including:

(2) New Units that measure 11'L x 10"W x 1 1/2" thick, with 12" spacers

Sold AS IS

Good Luck Bidding

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.


Please wait...