Secured Creditor, NY #15736

Bidding Now! - ends Mon, Nov 19 at 06:00:00 pm
Page 1 of 1    
Grid with imagesList view
Page 1 of 1    
Grid with imagesList view
You can enter a new max bid at any time by entering a bid greater than your current high bid.
A max bid would make it more difficult for others to outbid you.

A max bid is the highest amount you are willing to pay for an auction item.

In response to other bids, the auction system will automatically increase your bid in the smallest increment possible (up to your max bid amount) in order to maintain your lead position.

To get a max bid you simply enter the maximum amount you are willing to pay into the bid form just as you would any other bid. If your bid is more than one bidding increment above the current high bid you will get a max bid unless another bidder has a max bid in place that is higher than the amount you enter.

At the end of the auction, the winning bidder pays only the lowest winning bid possible. That means that you can win an auction item at a price less than your max bid amount.

Your max bid amount is kept confidential from other bidders.

You can lower or delete a max bid by entering a lower amount.

Note: After watching hundreds of auctions and talking to thousands of bidders, we think using max bids in your bidding strategy works best for most people. It eliminates some of the pressure and reduces the risk of "sniping", where other bidders slip in slightly higher bids in the last seconds of bidding.

You now have a max bid.

You can raise or lower your max bid at any time by entering a new amount.

If you wish to remove your max bid you can do so by entering an amount equal to the current bid into the bid form.

You have a max bid of %s on this item. That means that the system will place bids for you in response to bids from other bidders, up to %s.

You can adjust this max bid by using the form above.

If you want to remove your max bid click here.
You can add a max bid to protect your item against other bidders by using the form above.
Place a bid using the form above.

You can enter the minimum bid of %s or a greater amount.

If you bid more than the minimum bid you will get a max bid that the system will use to bid for you against other bidders, up to the amount you enter. So if you enter a bid of %s for this item, the system will place bids on your behalf in response to bids from other users until someone bids more than %s.
LowHighIncrement
$0.00$8.99$0.10
$9.00$39.99$1.00
$40.00$99.99$2.50
$100.00$199.99$5.00
$200.00$999.99$10.00
$1,000.00$2,499.99$25.00
$2,500.00$4,999.99$50.00
$5,000.00$1,000,000,000.00$100.00
LowHighIncrement
$0.00$100,000,000.00$1.00
Extended Bidding: i
Click to view Item Videos Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Like New Creaform Metrascan 210 3D Coordinate Measuring Machine with accessories

This system was purchased new in late 2015 and the company invested approximately $100,000.00 for the system

Category: Portable Technology: Laser Triangulation OS Compatibility:

Windows Performance Ratings: Max. Resolution: 0.1 mm Max. Accuracy: 0.085 mm Working Range: 0.3 – 0.5 m Scanning Area (Near): 210 x 210 mm Includes: Creaform Handy PROBE: Creaform C-Track 780 dual-camera sensor is fitted with high-quality optics and special lighting, enabling it to measure all reflectors within its operating space. In addition to tracking the reference model of the whole system, the C-Track 780 ensures the accurate localization of the MetraSCAN, and performs continuous image acquisition and transmission, lighting of reflectors, wireless communication with the MetraSCAN, management of exchanges with the computer and storage of sensor parameters. Also the Creaform Calibration Ball: Creaform Positioning Targets & Calibration Certificate

Includes the following hardware but the information is from Creaform and may contain variances from the subject unit:

(1) MetraSCAN 210 CCM with Serial #560267

Because it features extended scanning surface, the MetraSCAN 210 offers increased measurement speed with equal accuracy. Its increased stand-off and depth of field make for enhanced scanning flexibility. It is ideal for large surface metrology and large-scale reverse engineering.

The arm-free handheld MetraSCAN 3D optical CMM scanning systems are the most accurate scanning and probing solutions on the market, whether in lab or on the shop floor. Combined with the Handy PROBE, this complete and powerful solution increases the reliability, speed and versatility of the measurement process, whether for metrology or large-scale reverse engineering applications.

The MetraSCAN 3D scanners make it possible to easily and dynamically extend the measurement volume with no loss of accuracy. Compared to other 3D scanners on articulated arms, they allow total freedom of movement, which translates into increased productivity and quality.

(1) Calibration Ball Serial #541328, fast calibration process using a certified gauge, which ensures constant accuracy during the MetraSCAN 3D entire life cycle.

(1) Handy Probe, Serial #721650, Arm-Free Probing System Portable Coordinate Measuring Machine (CMM) has been developed to increase the reliability and speed of the measurement process.

The HandyPROBE arm-free probing system generates high-accuracy measurements (accuracy of up to 22 µm), and outperforms traditional portable CMMs on the shop floor. The HandyPROBE portable CMM is currently used on the production lines of major players from the automotive, aerospace and manufacturing industries.

Because it features the TRUaccuracy technology with dynamic referencing, the HandyPROBE PCMM is particularly efficient when used directly on the shop floor, as measurement accuracy is completely insensitive to vibrations or other changes in the environment.

  • Compared to other existing coordinate measurement technologies such as measuring arms and CMMs, the HandyPROBE arm-free probing system gives you total freedom of movement, allowing for Significant increase in productivity and quality of work.
  • Insensitive to changes in the environment (vibrations, part displacement, set-up or CMM instability have no impact)
  • Highly efficient at measuring parts that can’t be moved to a granite or cast iron table
  • Ideal for geometric and surface quality control
  • If offers scanning capabilities when paired with a MetraSCAN 3D scanner
  • Part size range : 1-3 meters, any type of materials
  • Extendable measurement range up to 10 m
  • Truly portable and wireless

(1) C-Track, The C-Track dual-camera sensors

  • The C-Track dual-camera sensors are fitted with high quality optics and special lighting, enabling them to measure all reflectors within their operating space. In addition to tracking the whole system’s reference model, the C-Track ensure the exact localization of the HandyPROBE, perform continuous image acquisition and transmission, lighting of reflectors, management of the exchanges with the computer and storage of the sensor parameters.
  • C-Link
  • When it is networked with 2 to 4 C-Tracks, the HandyPROBE gives access to the C-Link functionality, which drastically increases the measurement speed and ease-of-use of the system

(2) Transport hard case's

The Video Tab has several videos of similar units

NOTE: No Software is included.

***Note we advise when bidding on motorized equipment or vehicles that you inspect the unit prior to bidding

Sold AS IS

Good Luck Bidding

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Kaeser #SX 7.5 Sigma, Rotary Screw Air Compressor

3,379 hours on its meter

This pricey Air compressor is in very good operational condition.

Sold AS IS

Good Luck Bidding

The following information regarding Kaeser Rotary Compressors may contain variances from the subject unit:

Maximum Reliability and Efficiency
For years, customers have depended on Kaeser for reliable equipment and complete compressed air system solutions. Their research and development team continues to produce industry-leading compressor technology to meet virtually any compressed air need. The new SX series rotary screw compressors are no exception.

These new 5 and 7.5 hp models combine Kaeser's optimized Sigma Profile™ single-stage air end, high-efficiency motors, heavy-duty construction and simple modern controls into a compressor built for years of reliable service. A new cabinet design and component layout reduce noise levels and footprint while offering easier access during preventive maintenance.

Manufactured in a rigorous quality control program, Kaeser products are made to provide years of reliable service in the widest range of applications.

Maintenance Friendly Design
The SX is designed to be easily maintained and serviced. Maintenance friendly features include:
• Full access to all service items from one side
• Drive belt needs no adjustments
• Cartridge style 4 micron inlet filter
• Quick fluid change without pumping
• Spin on 10 micron fluid filter
• Spin on separator element
• Quick release fittings, drain and fill ports on separator vessel
• Cleanable cooler filter mat
• Side panel windows to view fluid level and test

Specifications

Product Family

 

Rotary Screw Compressors

 

Series

 

SX

 

Capacity

 

18 to 28 cfm

 

Pressure

 

125 to 217 psig

 

Capacity at Operating Pressure

 

18.7 cfm at 217 psig
23.7 cfm at 160 psig
28.3 cfm at 125 psig

 

Motor

 

7.5 hp

 

Length

 

23 1/4 in.

 

Width

 

24 7/8 in.

 

Height

 

38 1/8 in.

 

Weight (w/out tank)

 

342 lbs

 

Other Options

 

PC-based Sigma Control System
Programming Module
Tank mounting (see SX 5T)

 
 

Standard Features

 
  • A simple and reliable interface offers convenient pressure control and system monitoring with status displays and service indicators. Displays include discharge pressure and temperature, load and service hours as well as fault indicators.
  • Kaeser's power-saving, proprietary air end design delivers pressures up to 217 psig. Kaeser uses a newly designed air end for this SX series. It is precision-machined to close tolerances and optomized in size and profile to match the low air end speeds with their best specific performance, up to 20% less energy than comparable air ends.
  • High-efficiency, totally enclosed, fan cooled (TEFC) motors with Class F insulation are standard for long life in harsh environments. Tri-voltage 208-230/460 or 575 V, 3-phase, 60 Hz is standard. Other voltages are available. EPAct compliant. Magnetic Wye-Delta reduced voltage starters ensure low starting current and smooth acceleration.
  • Kaesar combines an over-sized cyclone separator vessel (ASME or CRN) with a convenient spin-on coalescing filter for superior fluid separation and exceptionally low carry-over (3 ppm or less). This results in less maintenance and better downstream air quality.
  • All units are filled with Kaeser Premium Fluid to cool, clean, and lubricate the air end. A thermostatically controlled combination valve ensures perfect fluid temperature regulation and incorporates a cooler by-pass and fluid filter. Main air and fluid lines are made of rigid pipe with flexible pipe connections. The 10 micron spin-on fluid filter extends fluid life and protects the air end.
  • Superior cabinet design reduces noise and footprint while offering easy access for service. A heavy-duty metal enclosure with a durable powder-coated finish keeps noise in but dirt and dust out. Thick sound insulation keeps noise levels as low as 62 dB(A), more than 10 dB(A) quieter than comparable units.
  • All maintenance items are accessible behind one easily removed locking panel. The fluid level indicator is visible through a conveniently placed window in the service side panel.
  • The double-flow cooling fan produces the cooling air flow for the drive motor on one side and the cooling air for the package on the other. The crescent-shaped fan blades help to further reduce sound emissions. Air is drawn into separate cooling zones for the drive motor and coolers. This "split cooling" design eliminates pre-heating, increasing cooling efficiency without increasing power consumption. Cooler temperatures also promote longer lubricant and motor life. Cooling air is exhausted through a side port at the top of the cabinet. Ducting this air enables heat recovery for significant energy savings.

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Pro-Safe 60 Gallon Yellow Steel Safety Cabinet

Model #CAB-F60G-M2D

60 Gallon

34" wide x 65" high x 34" deep

2 door

2 shelf

There are no keys but it is unlocked

Standard safety cabinet for flammable chemicals

This unit is in good condition.

Sold AS IS

Good Luck Bidding

The document tab has a company brochure with similar units

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

US General Tool Box

13 drawer steel constructed roll around tool chest

This chest is in very good condition.

Sold AS IS

Good Luck Bidding

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

US General Tool Box

13 drawer steel constructed roll around tool chest

This chest is in very good condition.

Sold AS IS

Good Luck Bidding

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Kohler 125 KVA Natural Gas Generator, #100RZ

Hours on meter-451

It has a Ford 4 cylinder #5C-489-AA engine

3Ph- 100KW/125KVA, 120/240, 139/240, 127/220

This was a good working unit that the company purchased used and never installed.

Sold AS IS

Good Luck Bidding 

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.


Please wait...