Town of Yorkshire HWY #12272

All items closed
Page 1 of 1    
Grid with imagesList view
Page 1 of 1    
Grid with imagesList view
You can enter a new proxy bid at any time by entering a bid greater than your current high bid.
A proxy bid would make it more difficult for others to outbid you.

A proxy bid is the highest amount you are willing to pay for an auction item.

In response to other bids, the auction system will automatically increase your bid in the smallest increment possible (up to your proxy bid amount) in order to maintain your lead position.

To get a proxy bid you simply enter the maximum amount you are willing to pay into the bid form just as you would any other bid. If your bid is more than one bidding increment above the current high bid you will get a proxy bid unless another bidder has a proxy bid in place that is higher than the amount you enter.

At the end of the auction, the winning bidder pays only the lowest winning bid possible. That means that you can win an auction item at a price less than your proxy bid amount.

Your proxy bid amount is kept confidential from other bidders.

You can lower or delete a proxy bid by entering a lower amount.

Note: After watching hundreds of auctions and talking to thousands of bidders, we think using proxy bids in your bidding strategy works best for most people. It eliminates some of the pressure and reduces the risk of "sniping", where other bidders slip in slightly higher bids in the last seconds of bidding.

You now have a proxy bid.

You can raise or lower your proxy bid at any time by entering a new amount.

If you wish to remove your proxy bid you can do so by entering an amount equal to the current bid into the bid form.

You have a proxy bid of %s on this item. That means that the system will place bids for you in response to bids from other bidders, up to %s.

You can adjust this proxy bid by using the form above.

If you want to remove your proxy bid click here.
You can add a proxy bid to protect your item against other bidders by using the form above.
Place a bid using the form above.

You can enter the minimum bid of %s or a greater amount.

If you bid more than the minimum bid you will get a proxy bid that the system will use to bid for you against other bidders, up to the amount you enter. So if you enter a bid of more than %s for this item, the system will place bids on your behalf in response to bids from other users until someone bids more than your high bid.
LowHighIncrement
$0.00$8.99$0.10
$9.00$39.99$1.00
$40.00$99.99$2.50
$100.00$199.99$5.00
$200.00$999.99$10.00
$1,000.00$2,499.99$25.00
$2,500.00$4,999.99$50.00
$5,000.00$1,000,000,000.00$100.00
LowHighIncrement
$0.00$100,000,000.00$1.00
Extended Bidding: i
Item Location: 8508 Block Road, Yorkshire, Cattaraugus, NY 14173
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Up For Bid is this 2007 Komatsu WA320-5L Galeo 4WD Articulated Wheel Loader

This strong running loader starts runs drives and is in good operational condition

It has a front mounted WA320-5 3.7 Yard Bucket

The body is solid with spot areas of surface rust and paint loss, view images

The Galeo Cab is in good shape, with ROPS type 6WB41A-N

The two-way radio will be removed

This loader is still in use as needed and there will be a small variance in hours

The front tires have heavy wear and the rears were updated in 2016

The following are some general statements regarding 2007 WA320-5 Loaders (May Have Variances):

Features:
Komatsu-integrated design offers the best value, reliability, and versatility.
Hydraulics, powertrain, frame, and all other major components are engineered by Komatsu.
You get a machine whose components are designed to work together for higher production,
greater reliability, and more versatility.

Reduced operator noise to 70 dB(A).

Expanded main monitor and troubleshooting display.

Larger cab with new layout design.

New tilt steering column.

4-Piece sealing with buffer ring in hydraulic cylinders.

Multi-function mono lever with integrated F/R switch (optional).

Large breakout force

Extended service intervals

Maintenance-free fully hydraulic wet-disc service and mechanical wet multi-disc parking brakes.

Electronically controlled Hydrostatic Transmission (HST) with variable shift control system.

Traction control system.

A powerful and efficient SAA6D102E-2-A Komatsu engine is Tier 2 EPA, EU and Japan emissions certified.

Full side opening gull-wing engine doors.

Radial Sealed air cleaner.

Swing-out hydraulic radiator fan.

Side-by-side type coolers for easy access and cleaning.

Overrun protection system.

Ground level servicing and fluid checks.

Extremely low fuel consumption.

Flat face "O-Ring" Hydraulic Seals for extended life.

Staircase-type steps with large rear-hinged doors.

Sealed DT electrical connectors

GALEO - Komatsus highly productive, innovative technology, environmentally friendly machines built for the 21st century.

Engine:
Model  Komatsu SAA6D102E-2-A
Type  Water-cooled, 4-cycle
Aspiration  Turbocharged, and air-to-air aftercooled
Number of cylinders  6
Bore x stroke 4.0" x 4.7" 102 mm x 120 mm
Piston displacement 359 in³ 5.98 ltr
Governor  Mechanical, all-speed control
Horsepower rating @ 2000 rpm (SAE J1349):  
Gross horsepower 170 HP 127 kW
Net horsepower 166 HP 124 kW
Tier 2, EU and Japan emissions certified  
Fuel system  Direct injection
Lubrication system:  
Method  Gear pump, force-lubrication
Filter  Full-flow
Air cleaner  Dry-type with double radial-sealed elements and dust evacuator, plus dust indicator.

Transmission:
Transmission  Hydrostatic, 1 pump, 2 motors with speed range select.
Travel Speed*: Forward Reverse
1st** 2.5 - 8.1 mph, 4.0 - 13.0 km/h 2.5 - 8.1 mph, 4.0 - 13.0 km/h
2nd 8.1 mph, 13.0 km/h 8.1 mph, 13.0 km/h
3rd 11.2 mph, 18.0 km/h 11.2 mph, 18.0 km/h
4th 23.6 mph, 38.0 km/h 23.6 mph, 38.0 km/h
*Measured with 20.5/25 (L2) tires  
**1st speed can be set variably 

Brakes:
Service brakes  Hydraulically-actuated, wet multi-disc brakes actuate on four wheels.
Parking brake  Wet, multi-disc brake on transfer output shaft.
Emergency brake  Independent service brake system (front and rear).

Bucket Controls:
The use of a PPC hydraulic control valve offers lighter operating effort for the work equipment control levers.
The reduction in the lever force and travel makes it easy to operate in the work environment.

Control positions:  
Boom  Raise, hold, lower, and float
Bucket  Roll back, hold, and dump

Hydraulic System:
Capacity (discharge flow) @ engine-rated rpm:  
Maximum flow for loader circuit  
Loader + steering pump 16.1 + 45.4 U.S. gal/min 61 + 172 ltr/min
Pilot pump
(Gear-type pumps) 14.3 U.S. gal/min 54 ltr/min
Relief valve setting:  
Loader 3,000 psi 210 kg/cm, 20.6 MPa
Steering 3,000 psi 210 kg/cm, 20.6 MPa
Control valve  2-spool open center type.
Hydraulic cylinders:  
Loader and steering  Double-acting, piston.
Hydraulic Cylinders / Number of Cylinders: Bore: Stroke:
Boom / 2 5.5" / 140 mm 29.1" / 740 mm
Bucket / 1 6.2" / 160 mm 21.0" / 535 mm
Steering / 2 2.8" / 70 mm 17.8" / 453 mm
Hydraulic cycle time (rated load in bucket):  
Raise  6.1 sec
Dump  1.2 sec
Lower (empty)  3.3 sec
Total cycle time  10.6 sec

Standard Equipment:
● Alternator, 60A, 24 volt

● Automatic boom kick out

● Axles, semi-floating with torque proportioning

● Backup alarm

● Backup light, rear

● Batteries, 150 Ah/2 x 12 V, 1000 CCA

● Bucket positioner, automatic

● Cab (ROPS/FOPS) with adjustable wrist rest, cigarette lighter/ashtray, dome light, electrically heated rear window, floor mat, front (intermittent) and rear wiper/washer, rear view mirrors (2 outside, 2 inside), right hand and left-hand door access with steps, sun visor

● Counterweight, standard

● Differentials, torque proportioning

● EMMS (Equipment Management Monitoring System):

�Gauges (Speedometer, engine water temperature, fuel level, HST oil temperature)

�LCD displays (filter/oil replacement time, HST selection, odometer, service meter, troubleshooting)

�Lights (Axle oil temperature, battery charge, brake oil pressure, central warning, directional indicator,
 engine oil pressure, engine pre-heater, HST oil filter clogging, high beam, maintenance, parking brake reminder,
 parking brake warning, steering oil pressure, transmission speed range, turn signals)

● Engine, Komatsu SAA6D102E-2-A

● Engine shut-off system, electric

● Engine water conditioner

● Fan, hydraulic driven, swing out

● Fenders, full front, partial rear

● Horn, electric

● Lift cylinders and bucket cylinder

● Lifting eyes

● Lights:

�Stop and tail

�Turn signal (2 front, 2 rear)

�Working (2 front, 2 rear, 2 outside cab)

● Loader linkage with standard lift boom

● Maintenance monitor panel

● 2 lever loader control

● Parking brake, wet disc

● Radiator mask, hinged

● Seat belt, retractable, 3" / 76 mm wide

● Seat, cloth, suspension, reclining with armrests and headrest, and a document holder

● Service brakes, hydraulic, wet multi-disc, inboard

● Speedometer (mph)

● Starting aid, intake manifold preheater

● Starting motor, 5.5 kW/24 V

● Steering wheel, tiltable

● Tires 20.5/25-12PR (L2), tubeless and rims

● Transmission (Hydrostatic with speed range select), automatic

● Transmission control, electric, steering column

● 2-spool valve for boom and bucket controls with PPC

● Vandalism protection kit 

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

  • Year: 2007
  • Make: Komatsu
  • Model: WA320-5L
  • Body Style: 4WD Articulated Wheel Loader
  • VIN/SN: A33015
  • Hours: 4,437 on meter, Loader still in use as needed may have a variance in hours
  • Engine Make/Model: SAA6D102E-2-A 5.9L, Water-Cooled, 4 Cycle, Turbocharged
  • Cyl: 6
  • Fuel Type: Diesel
  • Transmission Model: Hydrostatic, 1 Pump, 2 Motors with speed range select, 4 speed
  • Transmission Type: Hydrostatic
  • Single Axle/Dual Axle: Single Axle
  • Tire Size/Type: 20.5-25 L3 Fronts are Poor, Rears were updated in 2016
  • Tire Condition: Fair
  • 2WD/4WD: 4WD
  • Does the unit operate?: Yes
  • Does the vehicle start?: Yes
  • Are keys available?: Yes
  • Ownership Documents: Transferable Registration
  • Mechanical Condition: Good
  • Mechanical Notes: Starts runs and drives and is fully operational.
  • Body Condition: Good
  • Body Notes: Average rust, body is solid, with areas of spot rust, view images.
  • Interior Condition: Good
  • Titled: Yes
Extended Bidding: i
Item Location: 8508 Block Road, Yorkshire, Cattaraugus, NY 14173
Click to view Item Videos Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Up for Bid is this 1991 Case 1085C "Cruz-Air" Style Wheel Excavator

This unit starts runs and is in good operational condition however in its current condition before starting a solenoid switch is flipped and then the excavator starts up fine and runs strong, solenoid needs repair

There is a video of this unit in operation through the video tab

The body is solid with less than average rust and the cab is in poor to fair condition with the switch console housing damaged, view images

The tires are a mix of poor to fair

The driver's side door glass is cracked

The extendahoe boom is approximately 30' reach, it has a large CP Shovel Bucket attached

***Note we advise when bidding on motorized equipment or vehicles you inspect the unit prior to bidding

Good Luck Bidding

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.

  • Year: 1991
  • Make: Case
  • Model: 1085C
  • Body Style: Extendahoe Boom 4WD Wheel Excavator
  • VIN/SN: JAK0032533
  • Hours: 6,798
  • Engine Make/Model: Cummins
  • Cyl: 6
  • Fuel Type: Diesel
  • Transmission Model: 3F-3R, Torque Converter
  • Transmission Type: Auto
  • Single Axle/Dual Axle: Single Axle
  • Tire Size/Type: 17.5.25 L-2
  • Tire Condition: Poor
  • 2WD/4WD: 4WD
  • Does the unit operate?: Yes
  • Does the vehicle start?: Yes
  • Are keys available?: Yes
  • Ownership Documents: Transferable Registration
  • Mechanical Condition: Good
  • Mechanical Notes: Starts runs drives, see listing for additional information.
  • Body Condition: Good
  • Body Notes: Solid with less than average rust.
  • Interior Condition: Poor
  • Misc Info: Interior is poor to fair condition.
  • Titled: Yes
Extended Bidding: i
Item Location: 8508 Block Road, Yorkshire, Cattaraugus, NY 14173
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Up for Bid is this Used International Harvester UC-221 6 Cylinder Gasoline Engine

Was removed from a 1972 Ingram Roller/Compactor

Hours-668

This unit was in functional condition when removed from service and has been stored away since

This unit is being Sold AS IS

***Note we advise when bidding on motorized equipment or vehicles you inspect the unit prior to bidding

Good Luck Bidding

***Please review all Auction terms at left side of auction before bidding***

Terms of Sale:
All sales are final. No refunds will be issued. This item is being sold as is, where is, with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected this item and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this item at the buyer request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the item. Seller is NOT responsible for providing tools or heavy equipment to aid in removal. Items left on seller premises after this removal deadline will revert back to possession of the seller, with no refund.


Please wait...